roming user

Discuss the Scalix Server software

Moderators: ScalixSupport, admin

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

roming user

Postby helioperlman » Fri Mar 17, 2006 6:23 pm

Hello

I´m testing Scalix and install it on a SUSE10 and it´s working, I can send and receive e-mails on my LAN and to and from internet.

If I set one outside LAN user to conect via Outlook Express or Thunderbird there are two problems:
1 - pop3 don´t get any message or any error
2 - if I send a message to a user@mydomain it´s ok; but if I send to user@world I receive this error message:

from server: '550 5.7.1 <user@world>... Relaying denied. IP name possibly forged [xxx.xxx.xxx.xxx]', Porta: 25, Secure (SSL): No, Erro : 550, Nº error: 0x800CCC79

How to fix that?

Best regards

ScalixSupport
Scalix
Scalix
Posts: 5503
Joined: Thu Mar 25, 2004 8:15 pm

Postby ScalixSupport » Fri Mar 17, 2006 10:58 pm

It sounds like you have a firewall problem. Have0 you tried connecting to the POP (110) socket via telnet? What does it return? How about when you connect to the SMTP (25) socket?

Thanks,
Rachel

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Sat Mar 18, 2006 1:48 pm

No, its not a firewall problem. I´m able to telnet both. Here the results:

+OK Scalix POP3 interface ready on: suse10.my.domain
USER helio.perlman
+OK helio.perlman gets mail here
========> this is strange, the user no longer exist, I delete he


+OK Scalix POP3 interface ready on: suse10.my.domain
USER helio@my.domain
+OK helio@my.domain gets mail here
PASS xxxx
+OK User Signed on: helio@my.domain intray has 10 messages
stat
+OK 10 17920
list
+OK Listing
1 1536
2 1536
3 1536
4 2560
5 2560
6 2560
7 1536
8 1536
9 1024
10 1536
.
quit
+OK POP3 Server connection terminated

I configure an account with this user in Outlook Express but can’t get those e-mails

About SMTP:

telnet my.domain 25
HELO my.domain
250 suse10.my.domain Hello 200-201-202-203.speedyterra.com.br [200.201.202.203] (may be forged), pleased to meet you
MAIL FROM: helio@my.domain
250 2.1.0 helio@my.domain... Sender ok
RCPT TO: perlman@terra.com.br
550 5.7.1 perlman@terra.com.br... Relaying denied. IP name possibly forged [200.201.202.203]

ScalixSupport
Scalix
Scalix
Posts: 5503
Joined: Thu Mar 25, 2004 8:15 pm

Postby ScalixSupport » Sat Mar 18, 2006 2:03 pm

Relaying denied isn't a message that the SMTP Relay generates.

With Scalix, the error is "Denied due to spam list".

You didn't post the banner that you get when you telnet to port 25 so I'm suspecting that you are not connecting to the Scalix server when you submit the message.

Cheers

Dave

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Sat Mar 18, 2006 2:23 pm

I don´t include the banner because don´t see one. If I press enter as soon as I conect I receive:
554 suse10.pchelp.ath.cx ESMTP not accepting messages
500 5.5.1 Command unrecognized: ""

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Wed Mar 22, 2006 12:53 pm

Hello
Some ideas to resolve my problem?

ScalixSupport
Scalix
Scalix
Posts: 5503
Joined: Thu Mar 25, 2004 8:15 pm

Postby ScalixSupport » Wed Mar 22, 2006 12:57 pm

As I said, it doesn't look like you are talking to a Scalix server for message submission.

If you run the command:

Code: Select all

telnet hostname 25
where hostname is the name of the host you have configured Outlook Express to submit messages to, what response do you immediately get back, i.e. the 220 line ?

Cheers

Dave

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Wed Mar 22, 2006 1:24 pm

You are right:

220 suse10.pchelp.ath.cx ESMTP Sendmail 8.13.4/8.13.4/SuSE Linux 0.7; Wed, 22 Ma
r 2006 13:56:11 -0300

What do I need to do, so scalix is the server that respond to telnet?

And what about the pop3 ?

ScalixSupport
Scalix
Scalix
Posts: 5503
Joined: Thu Mar 25, 2004 8:15 pm

Postby ScalixSupport » Wed Mar 22, 2006 1:29 pm

For sendmail, take a look at http://www.scalix.com/community/viewtopic.php?t=1790#8203

For POP3, if you think you deleted the user, chances are the SYSTEM directory entry that Scalix uses for routing is no longer present.

Given that this is a POP3 account, the quickest thing is to delete and re-add the user to ensure that the entry is correct.

Cheers

Dave

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Wed Mar 22, 2006 2:00 pm

I don´t have:

Code:
O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA
O DaemonPortOptions=Port=smtp,Addr=xx.xx.xx.xx, Name=MTA

but I have:

Code:
O DaemonPortOptions= Name=MTA

may I change to
O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA
?

helioperlman
Posts: 10
Joined: Mon Mar 06, 2006 10:18 am
Contact:

Postby helioperlman » Wed Mar 22, 2006 2:24 pm

I change to:

O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA

and then try to telnet my host 25 - can not conect

How do I make scalix to listen on port 25 ?

Valerion
Scalix Star
Scalix Star
Posts: 2730
Joined: Thu Feb 26, 2004 7:40 am
Location: Johannesburg, South Africa
Contact:

Postby Valerion » Fri Mar 24, 2006 3:20 am

You've told sendmail not to listen on the ethernet interfaces, but only on localhost (which is correct). You should be able to

telnet localhost 25

and get a response from sendmail.

To get Scalix's SMTP listener to work, try the following:

omsetsvc -a smtpd y
omoff -d0 -w smtpd
omon -w smtpd

Then telnet to your ethernet IP on port 25 and it should work. You can check the status with

omstat -a


Return to “Scalix Server”



Who is online

Users browsing this forum: No registered users and 17 guests