Email address not the same as domain address

[ghost807]

We have an email address hosted by our isp of www.systemsequipment.com
Our internal domain name is syseqco.local
the internal domain name was chosen years ago before we purchased a domain name and really cannot be changed.
I have run into problems with email sent from scalix directly to its recepient being rejected because the domain name cannot be verified(=>SPAM)

I would like to get this resolved (i probably caused this mess by not knowing completely what i'm doing) one of two ways.
Forward the email to our isp and let them send it on. (with our internal name stripped off)
or
Change the name being sent my scalix in the header to match our isp domain name.

i've tried to look up relay and smtp relay but i don't completely understand everything that i read(sorry)
i don't know which way would be the best approach so i'm open to suggestions, but i'm sure i'll need some help setting it up.

i'm running scalix 10 CE on SUSE 10OSS

any help would be greatly appreciated.
Thanx
Dave Enyart Jr.

[ScalixSupport]

Are you saying that your email messages are going out from user@syseqco.local? Or are you saying that your scalix/sendmail host is being rejected by the receiving mta?

Thanks,
Don

[ghost807]

it's being rejected by their mta. it seems it can't verify the server name

the email is being sent out as enyartd@domain..com


this is the full header

Code: Select all

Content-Type:      multipart/mixed; boundary="----=_Part_7_10928329.1160415276827"
Date:     Mon, 9 Oct 2006 12:34:36 -0500 [10/09/2006 01:34:36 PM EDT]
Delivery-date:     Mon, 09 Oct 2006 13:32:53 -0400
Envelope-to:     david.enyart@otherdomain.org
From:     Dave Enyart Jr <enyartd@domain.com>
Message-ID:     <12855656.1160415276830.JavaMail.root@linuxmail.SYSEQCO.local>
Mime-Version:     1.0
Received:     

    * from [71.39.249.134] (helo=linuxmail.SYSEQCO.local) by frost.securenet-server.net with esmtps (TLSv1:AES256-SHA:256) (Exim 4.52) id 1GWyzl-0006Sm-6E for david.enyart@otherdomain.org; Mon, 09 Oct 2006 13:32:53 -0400
    * from linuxmail.SYSEQCO.local (localhost [127.0.0.1]) by linuxmail.SYSEQCO.local (8.13.4/8.13.4/SuSE Linux 0.7) with ESMTP id k99HYihd010930 for <david.enyart@otherdomain.org>; Mon, 9 Oct 2006 12:34:46 -0500
    * from linuxmail.SYSEQCO.local (root@localhost) by linuxmail.SYSEQCO.local (8.13.4/8.13.4/Submit) with ESMTP id k99HYiKa010919 for <david.enyart@otherdomain.org>; Mon, 9 Oct 2006 12:34:44 -0500
    * from linuxmail.SYSEQCO.local (linuxmail.SYSEQCO.local 192.168.1.24) by linuxmail.SYSEQCO.local (Scalix SMTP Relay 10.0.1.3) via ESMTP; Mon, 09 Oct 2006 12:34:38 -0500 (CDT)

Return-path:     <enyartd@domain.com>



the most notable server i've had this probem with is ups.com

i'll try to find that return message.

EDITED to remove real addresses.

[ghost807]

Code: Select all

The original message was received at Wed, 20 Sep 2006 13:05:26 -0500 from localhost [127.0.0.1]

   ----- The following addresses had permanent fatal errors ----- <cbuck@upsts.com>
    (reason: 571 Trusted Source Deny.)

   ----- Transcript of session follows ----- ... while talking to email2-vip.ups.com.:
<<< 571 Trusted Source Deny.
... while talking to email-vip.ups.com.:
<<< 571 Trusted Source Deny.
554 5.0.0 Service unavailable



Here is the transcript from that message

Code: Select all

Original-Envelope-Id: 8069610.1158775516663.JavaMail.root@linuxmail.SYSEQCO.local
Reporting-MTA: dns; linuxmail.SYSEQCO.local
Received-From-MTA: dns; localhost
Arrival-Date: Wed, 20 Sep 2006 13:05:26 -0500

Final-Recipient: rfc822; cbuck@upsts.com
X-Actual-Recipient: RFC822; cbuck@upsts.com
Action: failed
Status: 5.5.0
Diagnostic-Code: SMTP; 571 Trusted Source Deny.
Last-Attempt-Date: Wed, 20 Sep 2006 13:05:28 -0500

[ScalixSupport]

Your messages have the proper email address. So when someone addresses to you @systemsequipment.com it goes to your isp? And you are retrieving those messages with something like fetchmail?

Perhaps the best course action is to use your isp as a smarthost. Configure this by editing /etc/mail/sendmail.cf. Look for the section:

# "Smart" relay host (may be null)
DS

Add your isp's smtp mta to the DS line and restart sendmail. If your isp requires authentication that has been covered in previous posts.

Regards,
Don

[ghost807]

i'm using fetchmail to retreive the email from the isp, but the mail does not have to go to the isp to be send out. it just goes to the destination from what i can tell
sorry i'm kind of a newbie with this type of stuff.

by using smarthost does that created a 'trusted' source that someone like ups.com will accept?

i will work on setting up the smarthost.
thanx

[ScalixSupport]

but the mail does not have to go to the isp to be send out. it just goes to the destination from what i can tell

Yes, but your doman is .local which is not to be anything but a local domain.

by using smarthost does that created a 'trusted' source that someone like ups.com will accept?

Yes.

Regards,
Don

[ghost807]

ok i'm slowly understanding what your saying.
thanx for your help
Dave Jr.

[ghost807]

Well i'm still having some trouble setting this up and hopefully your still willing to help me out.
sendmail.cf file
notice

[code]
######################################################################
# /etc/sendmail.cf
#
# Generated by /sbin/conf.d/SuSEconfig.sendmail on 2006/09/14 09:18:38
# controlled by /etc/sysconfig/mail and /etc/sysconfig/sendmail
#
######################################################################
#
# Copyright (c) 1998-2004 Sendmail, Inc. and its suppliers.
# All rights reserved.
# Copyright (c) 1983, 1995 Eric P. Allman. All rights reserved.
# Copyright (c) 1988, 1993
# The Regents of the University of California. All rights reserved.
#
# By using this file, you agree to the terms and conditions set
# forth in the LICENSE file which can be found at the top level of
# the sendmail distribution.
#
#

######################################################################
######################################################################
#####
##### SENDMAIL CONFIGURATION FILE
#####
##### built by root@linuxmail.SYSEQCO.local on Thu Sep 14 09:18:38 CDT 2006
##### on SUSE LINUX 10.0 (i586) OSS
##### in /home/systems
##### using /usr/share/sendmail/ as configuration include directory
#####
######################################################################
#####
##### DO NOT EDIT THIS FILE! Only edit the source .mc file.
#####
######################################################################
######################################################################

##### $Id: cfhead.m4,v 8.116 2004/01/28 22:02:22 ca Exp $ #####
##### $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $ #####

##### @(#)Setup for SuSE Linux 8.12.11-0.8 (SuSE Linux) 2004/04/02 #####
##### @(#) suse-linux.m4 8.12.3-0.6 (SuSE Linux) 2003/04/15 #####

##### $Id: always_add_domain.m4,v 8.11 2000/09/12 22:00:53 ca Exp $ #####

##### $Id: local_procmail.m4,v 8.22 2002/11/17 04:24:19 ca Exp $ #####

##### $Id: use_ct_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ #####


##### $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $ #####

##### $Id: mailertable.m4,v 8.25 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: genericstable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: virtusertable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: access_db.m4,v 8.26 2004/06/24 18:10:02 ca Exp $ #####

##### $Id: greet_pause.m4,v 1.4 2004/07/06 20:49:51 ca Exp $ #####

##### $Id: generics_entire_domain.m4,v 8.1 1999/03/16 00:43:05 ca Exp $ #####

##### $Id: generic.m4,v 8.15 1999/04/04 00:51:09 ca Exp $ #####

##### $Id: redirect.m4,v 8.15 1999/08/06 01:47:36 gshapiro Exp $ #####

##### $Id: use_cw_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ #####


##### $Id: proto.m4,v 8.711 2004/08/04 21:29:55 ca Exp $ #####

# level 10 config file format
V10/Berkeley

# override file safeties - setting this option compromises system security,
# addressing the actual file configuration problem is preferred
# need to set this before any file actions are encountered in the cf file
O DontBlameSendmail=AssumeSafeChown,TrustStickyBit,GroupReadableSASLDBFile

# default LDAP map specification
# need to set this now before any LDAP maps are defined
#O LDAPDefaultSpec=-h localhost

##################
# local info #
##################

# my LDAP cluster
# need to set this before any LDAP lookups are done (including classes)
#D{sendmailMTACluster}$m

Cwlocalhost
# file containing names of hosts for which we receive email
Fw-o /etc/mail/local-host-names %[^\#]

# my official domain name
# ... define this only if sendmail cannot automatically determine your domain
#Dj$w.Foo.COM

# host/domain names ending with a token in class P are canonical
CP.

# "Smart" relay host (may be null)
DSsmtp.1and1.com


# operators that cannot be in local usernames (i.e., network indicators)
CO @ % !

# a class with just dot (for identifying canonical names)
C..

# a class with just a left bracket (for identifying domain literals)
C[[

# access_db acceptance class
C{Accept}OK RELAY


# Resolve map (to check if a host exists in check_mail)
Kresolve host -a<OKR> -T<TEMP>
C{ResOk}OKR


# Hosts for which relaying is permitted ($=R)
FR-o /etc/mail/relay-domains %[^\#]

# arithmetic map
Karith arith
# macro storage map
Kmacro macro
# possible values for TLS_connection in access map
C{Tls}VERIFY ENCR





# dequoting map
Kdequote dequote

# class E: names that should be exposed as from this host, even if we masquerade
# class L: names that should be delivered locally, even if we have a relay
# class M: domains that should be converted to $M
# class N: domains that should not be converted to $M
#CL root
C{G}linuxmail.SYSEQCO.local
F{G}/etc/mail/local-host-names
C{E}root



# my name for error messages
DnMAILER-DAEMON


# Mailer table (overriding domains)
Kmailertable hash -o /etc/mail/mailertable.db

# Generics table (mapping outgoing addresses)
Kgenerics hash -o /etc/mail/genericstable.db

# Virtual user table (maps incoming users)
Kvirtuser hash -o /etc/mail/virtusertable.db


# Access list database (for spam stomping)
Kaccess hash -T<TMPF> -o /etc/mail/access.db

CPREDIRECT

Cwlocalhost

# Configuration version number
DZ8.13.4/SuSE Linux 0.7
# Scalix Mappers and Trusted User
Komuser program /opt/scalix/bin/ommapsmtp
Komxport program /opt/scalix/bin/ommapsmtp -x
Tscalix


###############
# Options #
###############

# strip message body to 7 bits on input?
O SevenBitInput=False

# 8-bit data handling
#O EightBitMode=pass8

# wait for alias file rebuild (default units: minutes)
O AliasWait=10

# location of alias file
O AliasFile=/etc/aliases

# minimum number of free blocks on filesystem
O MinFreeBlocks=100

# maximum message size
#O MaxMessageSize=0

# substitution for space (blank) characters
O BlankSub=.

# avoid connecting to "expensive" mailers on initial submission?
O HoldExpensive=False

# checkpoint queue runs after every N successful deliveries
#O CheckpointInterval=10

# default delivery mode
O DeliveryMode=background

# error message header/file
#O ErrorHeader=/etc/mail/error-header

# error mode
#O ErrorMode=print

# save Unix-style "From_" lines at top of header?
#O SaveFromLine=False

# queue file mode (qf files)
#O QueueFileMode=0600

# temporary file mode
O TempFileMode=0600

# match recipients against GECOS field?
#O MatchGECOS=False

# maximum hop count
#O MaxHopCount=25

# location of help file
O HelpFile=/usr/lib/sendmail.d/helpfile

# ignore dots as terminators in incoming messages?
#O IgnoreDots=False

# name resolver options
#O ResolverOptions=+AAONLY

# deliver MIME-encapsulated error messages?
O SendMimeErrors=True

# Forward file search path
O ForwardPath=$z/.forward.$w+$h:$z/.forward+$h:$z/.forward.$w:$z/.forward

# open connection cache size
O ConnectionCacheSize=2

# open connection cache timeout
O ConnectionCacheTimeout=5m

# persistent host status directory
O HostStatusDirectory=.hoststat

# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery=False

# use Errors-To: header?
O UseErrorsTo=False

# log level
O LogLevel=9

# send to me too, even in an alias expansion?
#O MeToo=True

# verify RHS in newaliases?
O CheckAliases=False

# default messages to old style headers if no special punctuation?
O OldStyleHeaders=True

# SMTP daemon options
O DaemonPortOptions=Name=MTA

# SMTP client options
#O ClientPortOptions=Family=inet, Address=0.0.0.0

# Modifiers to define {daemon_flags} for direct submissions
#O DirectSubmissionModifiers

# Use as mail submission program? See sendmail/SECURITY
#O UseMSP

# privacy flags
O PrivacyOptions=authwarnings,needmailhelo,novrfy,noexpn,noverb

# who (if anyone) should get extra copies of error messages
O PostmasterCopy=Postmaster

# slope of queue-only function
#O QueueFactor=600000

# limit on number of concurrent queue runners
#O MaxQueueChildren

# maximum number of queue-runners per queue-grouping with multiple queues
#O MaxRunnersPerQueue=1

# priority of queue runners (nice(3))
#O NiceQueueRun

# shall we sort the queue by hostname first?
#O QueueSortOrder=priority

# minimum time in queue before retry
#O MinQueueAge=30m

# how many jobs can you process in the queue?
#O MaxQueueRunSize=10000

# perform initial split of envelope without checking MX records
#O FastSplit=1

# queue directory
O QueueDirectory=/var/spool/mqueue

# key for shared memory; 0 to turn off
#O SharedMemoryKey=0



# timeouts (many of these)
#O Timeout.initial=5m
#O Timeout.connect=5m
#O Timeout.aconnect=0s
O Timeout.iconnect=30s
#O Timeout.helo=5m
#O Timeout.mail=10m
#O Timeout.rcpt=1h
#O Timeout.datainit=5m
#O Timeout.datablock=1h
#O Timeout.datafinal=1h
#O Timeout.rset=5m
#O Timeout.quit=2m
#O Timeout.misc=2m
#O Timeout.command=1h
O Timeout.ident=0s
#O Timeout.fileopen=60s
#O Timeout.control=2m
O Timeout.queuereturn=5d
#O Timeout.queuereturn.normal=5d
#O Timeout.queuereturn.urgent=2d
#O Timeout.queuereturn.non-urgent=7d
#O Timeout.queuereturn.dsn=5d
O Timeout.queuewarn=4h
#O Timeout.queuewarn.normal=4h
#O Timeout.queuewarn.urgent=1h
#O Timeout.queuewarn.non-urgent=12h
#O Timeout.queuewarn.dsn=4h
#O Timeout.hoststatus=30m
#O Timeout.resolver.retrans=5s
#O Timeout.resolver.retrans.first=5s
#O Timeout.resolver.retrans.normal=5s
#O Timeout.resolver.retry=4
#O Timeout.resolver.retry.first=4
#O Timeout.resolver.retry.normal=4
#O Timeout.lhlo=2m
#O Timeout.auth=10m
#O Timeout.starttls=1h

# time for DeliverBy; extension disabled if less than 0
#O DeliverByMin=0

# should we not prune routes in route-addr syntax addresses?
#O DontPruneRoutes=False

# queue up everything before forking?
O SuperSafe=True

# status file
O StatusFile=/var/run/sendmail/statistics

# time zone handling:
# if undefined, use system default
# if defined but null, use TZ envariable passed in
# if defined and non-null, use that info
#O TimeZoneSpec=

# default UID (can be username or userid:groupid)
O DefaultUser=daemon:daemon

# list of locations of user database file (null means no lookup)
O UserDatabaseSpec=/etc/mail/userdb.db

# fallback MX host
#O FallbackMXhost=fall.back.host.net

# fallback smart host
#O FallbackSmartHost=fall.back.host.net

# if we are the best MX host for a site, try it directly instead of config err
#O TryNullMXList=False

# load average at which we just queue messages
#O QueueLA=8

# load average at which we refuse connections
#O RefuseLA=12

# log interval when refusing connections for this long
#O RejectLogInterval=3h

# load average at which we delay connections; 0 means no limit
#O DelayLA=0

# maximum number of children we allow at one time
O MaxDaemonChildren=15

# maximum number of new connections per second
#O ConnectionRateThrottle=0

# Width of the window
#O ConnectionRateWindowSize=60s

# work recipient factor
#O RecipientFactor=30000

# deliver each queued job in a separate process?
#O ForkEachJob=False

# work class factor
#O ClassFactor=1800

# work time factor
#O RetryFactor=90000

# default character set
#O DefaultCharSet=unknown-8bit

# service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
O ServiceSwitchFile=/etc/mail/service.switch

# hosts file (normally /etc/hosts)
O HostsFile=/etc/hosts

# dialup line delay on connection failure
#O DialDelay=10s

# action to take if there are no recipients in the message
O NoRecipientAction=add-to-undisclosed

# chrooted environment for writing to files
#O SafeFileEnvironment=/arch

# are colons OK in addresses?
#O ColonOkInAddr=True

# shall I avoid expanding CNAMEs (violates protocols)?
#O DontExpandCnames=False

# SMTP initial login message (old $e macro)
O SmtpGreetingMessage=$j Sendmail $v/$Z; $b

# UNIX initial From header format (old $l macro)
O UnixFromLine=From $g $d

# From: lines that have embedded newlines are unwrapped onto one line
#O SingleLineFromHeader=False

# Allow HELO SMTP command that does not include a host name
#O AllowBogusHELO=False

# Characters to be quoted in a full name phrase (@,;:\()[] are automatic)
#O MustQuoteChars=.

# delimiter (operator) characters (old $o macro)
O OperatorChars=.:%@!^/[]+=

# shall I avoid calling initgroups(3) because of high NIS costs?
#O DontInitGroups=False

# are group-writable :include: and .forward files (un)trustworthy?
# True (the default) means they are not trustworthy.
#O UnsafeGroupWrites=True


# where do errors that occur when sending errors get sent?
#O DoubleBounceAddress=postmaster

# where to save bounces if all else fails
O DeadLetterDrop=/var/log/dead.letter

# what user id do we assume for the majority of the processing?
#O RunAsUser=sendmail

# maximum number of recipients per SMTP envelope
#O MaxRecipientsPerMessage=0

# limit the rate recipients per SMTP envelope are accepted
# once the threshold number of recipients have been rejected
#O BadRcptThrottle=0

# shall we get local names from our installed interfaces?
#O DontProbeInterfaces=False

# Return-Receipt-To: header implies DSN request
#O RrtImpliesDsn=False

# override connection address (for testing)
#O ConnectOnlyTo=0.0.0.0

# Trusted user for file ownership and starting the daemon
#O TrustedUser=root

# Control socket for daemon management
O ControlSocketName=/var/run/sendmail/control

# Maximum MIME header length to protect MUAs
O MaxMimeHeaderLength=256/128

# Maximum length of the sum of all headers
O MaxHeadersLength=32768

# Maximum depth of alias recursion
#O MaxAliasRecursion=10

# location of pid file
#O PidFile=/var/run/sendmail.pid

# Prefix string for the process title shown on 'ps' listings
#O ProcessTitlePrefix=prefix

# Data file (df) memory-buffer file maximum size
#O DataFileBufferSize=4096

# Transcript file (xf) memory-buffer file maximum size
#O XscriptFileBufferSize=4096

# lookup type to find information about local mailboxes
#O MailboxDatabase=pw

# override compile time flag REQUIRES_DIR_FSYNC
#O RequiresDirfsync=true

# list of authentication mechanisms
#O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5

# Authentication realm
#O AuthRealm

# default authentication information for outgoing connections
#O DefaultAuthInfo=/etc/mail/default-auth-info

# SMTP AUTH flags
#O AuthOptions

# SMTP AUTH maximum encryption strength
#O AuthMaxBits

# SMTP STARTTLS server options
#O TLSSrvOptions

# Input mail filters
#O InputMailFilters


# CA directory
O CACertPath=/etc/mail/certs
# CA file
#O CACertFile
# Server Cert
#O ServerCertFile
# Server private key
#O ServerKeyFile
# Client Cert
#O ClientCertFile
# Client private key
#O ClientKeyFile
# File containing certificate revocation lists
#O CRLFile
# DHParameters (only required if DSA/DH is used)
#O DHParameters
# Random data source (required for systems without /dev/urandom under OpenSSL)
#O RandFile

############################
# QUEUE GROUP DEFINITIONS #
############################


###########################
# Message precedences #
###########################

Pfirst-class=0
Pspecial-delivery=100
Plist=-30
Pbulk=-60
Pjunk=-100

#####################
# Trusted users #
#####################

# this is equivalent to setting class "t"
Ft-o /etc/mail/trusted-users %[^\#]
Troot
Tdaemon
Tuucp
Tmdom vscan wwwrun root uucp daemon mail

#########################
# Format of headers #
#########################

H?P?Return-Path: <$g>
HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
$.$?{auth_type}(authenticated$?{auth_ssf} bits=${auth_ssf}$.)
$.by $j ($v/$Z)$?r with $r$. id $i$?{tls_version}
(version=${tls_version} cipher=${cipher} bits=${cipher_bits} verify=${verify})$.$?u
for $u; $|;
$.$b
H?D?Resent-Date: $a
H?D?Date: $a
H?F?Resent-From: $?x$x <$g>$|$g$.
H?F?From: $?x$x <$g>$|$g$.
H?x?Full-Name: $x
# HPosted-Date: $a
# H?l?Received-Date: $b
H?M?Resent-Message-Id: <$t.$i@$j>
H?M?Message-Id: <$t.$i@$j>

#
######################################################################
######################################################################
#####
##### REWRITING RULES
#####
######################################################################
######################################################################

############################################
### Ruleset 3 -- Name Canonicalization ###
############################################
Scanonify=3

# handle null input (translate to <@> special case)
R$@ $@ <@>

# strip group: syntax (not inside angle brackets!) and trailing semicolon
R$* $: $1 <@> mark addresses
R$* < $* > $* <@> $: $1 < $2 > $3 unmark <addr>
R@ $* <@> $: @ $1 unmark @host:...
R$* [ IPv6 : $+ ] <@> $: $1 [ IPv6 : $2 ] unmark IPv6 addr
R$* :: $* <@> $: $1 :: $2 unmark node::addr
R:include: $* <@> $: :include: $1 unmark :include:...
R$* : $* [ $* ] $: $1 : $2 [ $3 ] <@> remark if leading colon
R$* : $* <@> $: $2 strip colon if marked
R$* <@> $: $1 unmark
R$* ; $1 strip trailing semi
R$* < $+ :; > $* $@ $2 :; <@> catch <list:;>
R$* < $* ; > $1 < $2 > bogus bracketed semi

# null input now results from list:; syntax
R$@ $@ :; <@>

# strip angle brackets -- note RFC733 heuristic to get innermost item
R$* $: < $1 > housekeeping <>
R$+ < $* > < $2 > strip excess on left
R< $* > $+ < $1 > strip excess on right
R<> $@ < @ > MAIL FROM:<> case
R< $+ > $: $1 remove housekeeping <>

# strip route address <@a,@b,@c:user@d> -> <user@d>
R@ $+ , $+ $2
R@ [ $* ] : $+ $2
R@ $+ : $+ $2

# find focus for list syntax
R $+ : $* ; @ $+ $@ $>Canonify2 $1 : $2 ; < @ $3 > list syntax
R $+ : $* ; $@ $1 : $2; list syntax

# find focus for @ syntax addresses
R$+ @ $+ $: $1 < @ $2 > focus on domain
R$+ < $+ @ $+ > $1 $2 < @ $3 > move gaze right
R$+ < @ $+ > $@ $>Canonify2 $1 < @ $2 > already canonical


# convert old-style addresses to a domain-based address
R$- ! $+ $@ $>Canonify2 $2 < @ $1 .UUCP > resolve uucp names
R$+ . $- ! $+ $@ $>Canonify2 $3 < @ $1 . $2 > domain uucps
R$+ ! $+ $@ $>Canonify2 $2 < @ $1 .UUCP > uucp subdomains

# if we have % signs, take the rightmost one
R$* % $* $1 @ $2 First make them all @s.
R$* @ $* @ $* $1 % $2 @ $3 Undo all but the last.
R$* @ $* $@ $>Canonify2 $1 < @ $2 > Insert < > and finish

# else we must be a local name
R$* $@ $>Canonify2 $1


################################################
### Ruleset 96 -- bottom half of ruleset 3 ###
################################################

SCanonify2=96

# handle special cases for local names
R$* < @ localhost > $* $: $1 < @ $j . > $2 no domain at all
R$* < @ localhost . $m > $* $: $1 < @ $j . > $2 local domain
R$* < @ localhost . UUCP > $* $: $1 < @ $j . > $2 .UUCP domain

# check for IPv4/IPv6 domain literal
R$* < @ [ $+ ] > $* $: $1 < @@ [ $2 ] > $3 mark [addr]
R$* < @@ $=w > $* $: $1 < @ $j . > $3 self-literal
R$* < @@ $+ > $* $@ $1 < @ $2 > $3 canon IP addr





# if really UUCP, handle it immediately

# try UUCP traffic as a local address
R$* < @ $+ . UUCP > $* $: $1 < @ $[ $2 $] . UUCP . > $3
R$* < @ $+ . . UUCP . > $* $@ $1 < @ $2 . > $3

# hostnames ending in class P are always canonical
R$* < @ $* $=P > $* $: $1 < @ $2 $3 . > $4
R$* < @ $* $~P > $* $: $&{daemon_flags} $| $1 < @ $2 $3 > $4
R$* CC $* $| $* < @ $+.$+ > $* $: $3 < @ $4.$5 . > $6
R$* CC $* $| $* $: $3
# pass to name server to make hostname canonical
R$* $| $* < @ $* > $* $: $2 < @ $[ $3 $] > $4
R$* $| $* $: $2

# local host aliases and pseudo-domains are always canonical
R$* < @ $=w > $* $: $1 < @ $2 . > $3
R$* < @ $=M > $* $: $1 < @ $2 . > $3
R$* < @ $={VirtHost} > $* $: $1 < @ $2 . > $3
R$* < @ $* $=G > $* $: $1 < @ $2 $3 . > $4
R$* < @ $* . . > $* $1 < @ $2 . > $3


##################################################
### Ruleset 4 -- Final Output Post-rewriting ###
##################################################
Sfinal=4

R$+ :; <@> $@ $1 : handle <list:;>
R$* <@> $@ handle <> and list:;

# strip trailing dot off possibly canonical name
R$* < @ $+ . > $* $1 < @ $2 > $3

# eliminate internal code
R$* < @ *LOCAL* > $* $1 < @ $j > $2

# externalize local domain info
R$* < $+ > $* $1 $2 $3 defocus
R@ $+ : @ $+ : $+ @ $1 , @ $2 : $3 <route-addr> canonical
R@ $* $@ @ $1 ... and exit

# UUCP must always be presented in old form
R$+ @ $- . UUCP $2!$1 u@h.UUCP => h!u

# delete duplicate local names
R$+ % $=w @ $=w $1 @ $2 u%host@host => u@host



##############################################################
### Ruleset 97 -- recanonicalize and call ruleset zero ###
### (used for recursive calls) ###
##############################################################

SRecurse=97
R$* $: $>canonify $1
R$* $@ $>parse $1


######################################
### Ruleset 0 -- Parse Address ###
######################################

Sparse=0

R$* $: $>Parse0 $1 initial parsing
R<@> $#local $: <@> special case error msgs
R$* $: $>ParseLocal $1 handle local hacks
R$* $: $>Parse1 $1 final parsing

#
# Parse0 -- do initial syntax checking and eliminate local addresses.
# This should either return with the (possibly modified) input
# or return with a #error mailer. It should not return with a
# #mailer other than the #error mailer.
#

SParse0
R<@> $@ <@> special case error msgs
R$* : $* ; <@> $#error $@ 5.1.3 $: "553 List:; syntax illegal for recipient addresses"
R@ <@ $* > < @ $1 > catch "@@host" bogosity
R<@ $+> $#error $@ 5.1.3 $: "553 User address required"
R$+ <@> $#error $@ 5.1.3 $: "553 Hostname required"
R$* $: <> $1
R<> $* < @ [ $* ] : $+ > $* $1 < @ [ $2 ] : $3 > $4
R<> $* < @ [ $* ] , $+ > $* $1 < @ [ $2 ] , $3 > $4
R<> $* < @ [ $* ] $+ > $* $#error $@ 5.1.2 $: "553 Invalid address"
R<> $* < @ [ $+ ] > $* $1 < @ [ $2 ] > $3
R<> $* <$* : $* > $* $#error $@ 5.1.3 $: "553 Colon illegal in host name part"
R<> $* $1
R$* < @ . $* > $* $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* .. $* > $* $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* @ > $* $#error $@ 5.1.2 $: "553 Invalid route address"
R$* @ $* < @ $* > $* $#error $@ 5.1.3 $: "553 Invalid route address"
R$* , $~O $* $#error $@ 5.1.3 $: "553 Invalid route address"


# now delete the local info -- note $=O to find characters that cause forwarding
R$* < @ > $* $@ $>Parse0 $>canonify $1 user@ => user
R< @ $=w . > : $* $@ $>Parse0 $>canonify $2 @here:... -> ...
R$- < @ $=w . > $: $(dequote $1 $) < @ $2 . > dequote "foo"@here
R< @ $+ > $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ $=w . > $@ $>Parse0 $>canonify $1 $2 $3 ...@here -> ...
R$- $: $(dequote $1 $) < @ *LOCAL* > dequote "foo"
R< @ *LOCAL* > $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ *LOCAL* >
$@ $>Parse0 $>canonify $1 $2 $3 ...@*LOCAL* -> ...
R$* < @ *LOCAL* > $: $1

#
# Parse1 -- the bottom half of ruleset 0.
#

SParse1

# handle numeric address spec
R$* < @ [ $+ ] > $* $: $>ParseLocal $1 < @ [ $2 ] > $3 numeric internet spec
R$* < @ [ $+ ] > $* $: $1 < @ [ $2 ] : $S > $3 Add smart host to path
R$* < @ [ $+ ] : > $* $#esmtp $@ [$2] $: $1 < @ [$2] > $3 no smarthost: send
R$* < @ [ $+ ] : $- : $*> $* $#$3 $@ $4 $: $1 < @ [$2] > $5 smarthost with mailer
R$* < @ [ $+ ] : $+ > $* $#esmtp $@ $3 $: $1 < @ [$2] > $4 smarthost without mailer

# handle virtual users
R$+ $: <!> $1 Mark for lookup
R<!> $+ < @ $={VirtHost} . > $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<!> $+ < @ $=w . > $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<@> $+ + $+ < @ $* . >
$: < $(virtuser $1 + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $* . >
$: < $(virtuser $1 + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $* . >
$: < $(virtuser $1 @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $+ < @ $+ . > $: < $(virtuser + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $+ . > $: < $(virtuser + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
R<@> $+ + $* < @ $+ . > $: < $(virtuser @ $3 $@ $1 $@ $2 $@ +$2 $: ! $) > $1 + $2 < @ $3 . >
R<@> $+ < @ $+ . > $: < $(virtuser @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
R<@> $+ $: $1
R<!> $+ $: $1
R< error : $-.$-.$- : $+ > $* $#error $@ $1.$2.$3 $: $4
R< error : $- $+ > $* $#error $@ $(dequote $1 $) $: $2
R< $+ > $+ < @ $+ > $: $>Recurse $1

# short circuit local delivery so forwarded email works


# The following lines were inserted for Scalix. Ignore the preceding comment.

Rscalix $#omxport$@ $( omxport $w $) $:scalix
Rscalix < @ $=w . > $#omxport$@ $( omxport $1 $) $:scalix

R$+ $: $(omuser $1 $)
Rscalix:$-:$+ $# scalix $@ $1 $: $2

# End of Scalix lines. The Remaining names must be local
R$=L < @ $=w . > $#local $: @ $1 special local names
R$+ < @ $=w . > $#local $: $1 regular local name

# not local -- try mailer table lookup
R$* <@ $+ > $* $: < $2 > $1 < @ $2 > $3 extract host name
R< $+ . > $* $: < $1 > $2 strip trailing dot
R< $+ > $* $: < $(mailertable $1 $) > $2 lookup
R< $~[ : $* > $* $>MailerToTriple < $1 : $2 > $3 check -- resolved?
R< $+ > $* $: $>Mailertable <$1> $2 try domain

# resolve locally connected UUCP links
R$* < @ $=Z . UUCP. > $* $#uucp-uudom $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=Y . UUCP. > $* $#uucp-new $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=U . UUCP. > $* $#uucp-old $@ $2 $: $1 < @ $2 .UUCP. > $3

# resolve remotely connected UUCP links (if any)

# resolve fake top level domains by forwarding to other hosts

# forward other UUCP traffic straight to UUCP
R$* < @ $+ .UUCP. > $* $#uucp-old $@ $2 $: $1 < @ $2 .UUCP. > $3 user@host.UUCP


# pass names that still have a host to a smarthost (if defined)
R$* < @ $* > $* $: $>MailerToTriple < $S > $1 < @ $2 > $3 glue on smarthost name

# deal with other remote names
R$* < @$* > $* $#esmtp $@ $2 $: $1 < @ $2 > $3 user@host.domain

# handle locally delivered names
R$=L $#local $: @ $1 special local names
R$+ $#local $: $1 regular local names

###########################################################################
### Ruleset 5 -- special rewriting after aliases have been expanded ###
###########################################################################

SLocal_localaddr
Slocaladdr=5
R$+ $: $1 $| $>"Local_localaddr" $1
R$+ $| $#ok $@ $1 no change
R$+ $| $#$* $#$2
R$+ $| $* $: $1




# deal with plussed users so aliases work nicely
R$+ + * $#local $@ $&h $: $1
R$+ + $* $#local $@ + $2 $: $1 + *

# prepend an empty "forward host" on the front
R$+ $: <> $1




R< > $+ $: < > < $1 <> $&h > nope, restore +detail

R< > < $+ <> + $* > $: < > < $1 + $2 > check whether +detail
R< > < $+ <> $* > $: < > < $1 > else discard
R< > < $+ + $* > $* < > < $1 > + $2 $3 find the user part
R< > < $+ > + $* $#local $@ $2 $: @ $1 strip the extra +
R< > < $+ > $@ $1 no +detail
R$+ $: $1 <> $&h add +detail back in

R$+ <> + $* $: $1 + $2 check whether +detail
R$+ <> $* $: $1 else discard
R< local : $* > $* $: $>MailerToTriple < local : $1 > $2 no host extension
R< error : $* > $* $: $>MailerToTriple < error : $1 > $2 no host extension

R< $~[ : $+ > $+ $: $>MailerToTriple < $1 : $2 > $3 < @ $2 >

R< $+ > $+ $@ $>MailerToTriple < $1 > $2 < @ $1 >


###################################################################
### Ruleset 90 -- try domain part of mailertable entry ###
###################################################################

SMailertable=90
R$* <$- . $+ > $* $: $1$2 < $(mailertable .$3 $@ $1$2 $@ $2 $) > $4
R$* <$~[ : $* > $* $>MailerToTriple < $2 : $3 > $4 check -- resolved?
R$* < . $+ > $* $@ $>Mailertable $1 . <$2> $3 no -- strip & try again
R$* < $* > $* $: < $(mailertable . $@ $1$2 $) > $3 try "."
R< $~[ : $* > $* $>MailerToTriple < $1 : $2 > $3 "." found?
R< $* > $* $@ $2 no mailertable match

###################################################################
### Ruleset 95 -- canonify mailer:[user@]host syntax to triple ###
###################################################################

SMailerToTriple=95
R< > $* $@ $1 strip off null relay
R< error : $-.$-.$- : $+ > $* $#error $@ $1.$2.$3 $: $4
R< error : $- : $+ > $* $#error $@ $(dequote $1 $) $: $2
R< error : $+ > $* $#error $: $1
R< local : $* > $* $>CanonLocal < $1 > $2
R< $~[ : $+ @ $+ > $*<$*>$* $# $1 $@ $3 $: $2<@$3> use literal user
R< $~[ : $+ > $* $# $1 $@ $2 $: $3 try qualified mailer
R< $=w > $* $@ $2 delete local host
R< $+ > $* $#relay $@ $1 $: $2 use unqualified mailer

###################################################################
### Ruleset CanonLocal -- canonify local: syntax ###
###################################################################

SCanonLocal
# strip local host from routed addresses
R< $* > < @ $+ > : $+ $@ $>Recurse $3
R< $* > $+ $=O $+ < @ $+ > $@ $>Recurse $2 $3 $4

# strip trailing dot from any host name that may appear
R< $* > $* < @ $* . > $: < $1 > $2 < @ $3 >

# handle local: syntax -- use old user, either with or without host
R< > $* < @ $* > $* $#local $@ $1@$2 $: $1
R< > $+ $#local $@ $1 $: $1

# handle local:user@host syntax -- ignore host part
R< $+ @ $+ > $* < @ $* > $: < $1 > $3 < @ $4 >

# handle local:user syntax
R< $+ > $* <@ $* > $* $#local $@ $2@$3 $: $1
R< $+ > $* $#local $@ $2 $: $1

###################################################################
### Ruleset 93 -- convert header names to masqueraded form ###
###################################################################

SMasqHdr=93

# handle generics database
R$+ < @ $* $=G . > $: < $1@$2$3 > $1 < @ $2$3 . > @ mark
R$+ < @ *LOCAL* > $: < $1@$j > $1 < @ *LOCAL* > @ mark
R< $+ > $+ < $* > @ $: < $(generics $1 $: @ $1 $) > $2 < $3 >
R<@$+ + $* @ $+> $+ < @ $+ >
$: < $(generics $1+*@$3 $@ $2 $:@$1 + $2@$3 $) > $4 < @ $5 >
R<@$+ + $* @ $+> $+ < @ $+ >
$: < $(generics $1@$3 $: $) > $4 < @ $5 >
R<@$+ > $+ < @ $+ > $: < > $2 < @ $3 >
R< > $+ < @ $+ . > $: < $(generics @$2 $@ $1 $: $) > $1 < @ $2 . >
R< > $+ < @ $+ > $: < $(generics $1 $: $) > $1 < @ $2 >
R< > $+ + $* < @ $+ > $: < $(generics $1+* $@ $2 $: $) > $1 + $2 < @ $3 >
R< > $+ + $* < @ $+ > $: < $(generics $1 $: $) > $1 + $2 < @ $3 >
R< $* @ $* > $* < $* > $@ $>canonify $1 @ $2 found qualified
R< $+ > $* < $* > $: $>canonify $1 @ *LOCAL* found unqualified
R< > $* $: $1 not found

# do not masquerade anything in class N
R$* < @ $* $=N . > $@ $1 < @ $2 $3 . >

R$* < @ *LOCAL* > $@ $1 < @ $j . >

###################################################################
### Ruleset 94 -- convert envelope names to masqueraded form ###
###################################################################

SMasqEnv=94
R$* < @ *LOCAL* > $* $: $1 < @ $j . > $2

###################################################################
### Ruleset 98 -- local part of ruleset zero (can be null) ###
###################################################################

SParseLocal=98

# addresses sent to foo@host.REDIRECT will give a 551 error code
R$* < @ $+ .REDIRECT. > $: $1 < @ $2 . REDIRECT . > < ${opMode} >
R$* < @ $+ .REDIRECT. > <i> $: $1 < @ $2 . REDIRECT. >
R$* < @ $+ .REDIRECT. > < $- > $#error $@ 5.1.1 $: "551 User has moved; please try " <$1@$2>




######################################################################
### D: LookUpDomain -- search for domain in access database
###
### Parameters:
### <$1> -- key (domain name)
### <$2> -- default (what to return if not found in db)
### <$3> -- mark (must be <(!|+) single-token>)
### ! does lookup only with tag
### + does lookup with and without tag
### <$4> -- passthru (additional data passed unchanged through)
######################################################################

SD
R<$*> <$+> <$- $-> <$*> $: < $(access $4:$1 $: ? $) > <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$+> <+ $-> <$*> $: < $(access $1 $: ? $) > <$1> <$2> <+ $3> <$4>
R<?> <[$+.$-]> <$+> <$- $-> <$*> $@ $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <[$+::$-]> <$+> <$- $-> <$*> $: $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <[$+:$-]> <$+> <$- $-> <$*> $: $>D <[$1]> <$3> <$4 $5> <$6>
R<?> <$+.$+> <$+> <$- $-> <$*> $@ $>D <$2> <$3> <$4 $5> <$6>
R<?> <$+> <$+> <$- $-> <$*> $@ <$2> <$5>
R<$* <TMPF>> <$+> <$+> <$- $-> <$*> $@ <<TMPF>> <$6>
R<$*> <$+> <$+> <$- $-> <$*> $@ <$1> <$6>

######################################################################
### A: LookUpAddress -- search for host address in access database
###
### Parameters:
### <$1> -- key (dot quadded host address)
### <$2> -- default (what to return if not found in db)
### <$3> -- mark (must be <(!|+) single-token>)
### ! does lookup only with tag
### + does lookup with and without tag
### <$4> -- passthru (additional data passed through)
######################################################################

SA
R<$+> <$+> <$- $-> <$*> $: < $(access $4:$1 $: ? $) > <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$+> <+ $-> <$*> $: < $(access $1 $: ? $) > <$1> <$2> <+ $3> <$4>
R<?> <$+::$-> <$+> <$- $-> <$*> $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+:$-> <$+> <$- $-> <$*> $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+.$-> <$+> <$- $-> <$*> $@ $>A <$1> <$3> <$4 $5> <$6>
R<?> <$+> <$+> <$- $-> <$*> $@ <$2> <$5>
R<$* <TMPF>> <$+> <$+> <$- $-> <$*> $@ <<TMPF>> <$6>
R<$*> <$+> <$+> <$- $-> <$*> $@ <$1> <$6>

######################################################################
### CanonAddr -- Convert an address into a standard form for
### relay checking. Route address syntax is
### crudely converted into a %-hack address.
###
### Parameters:
### $1 -- full recipient address
###
### Returns:
### parsed address, not in source route form
######################################################################

SCanonAddr
R$* $: $>Parse0 $>canonify $1 make domain canonical


######################################################################
### ParseRecipient -- Strip off hosts in $=R as well as possibly
### $* $=m or the access database.
### Check user portion for host separators.
###
### Parameters:
### $1 -- full recipient address
###
### Returns:
### parsed, non-local-relaying address
######################################################################

SParseRecipient
R$* $: <?> $>CanonAddr $1
R<?> $* < @ $* . > <?> $1 < @ $2 > strip trailing dots
R<?> $- < @ $* > $: <?> $(dequote $1 $) < @ $2 > dequote local part

# if no $=O character, no host in the user portion, we are done
R<?> $* $=O $* < @ $* > $: <NO> $1 $2 $3 < @ $4>
R<?> $* $@ $1


R<NO> $* < @ $* $=R > $: <RELAY> $1 < @ $2 $3 >
R<NO> $* < @ $+ > $: $>D <$2> <NO> <+ To> <$1 < @ $2 >>
R<$+> <$+> $: <$1> $2



R<RELAY> $* < @ $* > $@ $>ParseRecipient $1
R<$+> $* $@ $2


######################################################################
### check_relay -- check hostname/address on SMTP startup
######################################################################



SLocal_check_relay
Scheck_relay
R$* $: $1 $| $>"Local_check_relay" $1
R$* $| $* $| $#$* $#$3
R$* $| $* $| $* $@ $>"Basic_check_relay" $1 $| $2

SBasic_check_relay
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2

R$+ $| $+ $: $>D < $1 > <?> <+ Connect> < $2 >
R $| $+ $: $>A < $1 > <?> <+ Connect> <> empty client_name
R<?> <$+> $: $>A < $1 > <?> <+ Connect> <> no: another lookup
R<?> <$*> $: OK found nothing
R<$={Accept}> <$*> $@ $1 return value of lookup
R<REJECT> <$*> $#error $@ 5.7.1 $: "550 Access denied"
R<DISCARD> <$*> $#discard $: discard
R<QUARANTINE:$+> <$*> $#error $@ quarantine $: $1
R<ERROR:$-.$-.$-:$+> <$*> $#error $@ $1.$2.$3 $: $4
R<ERROR:$+> <$*> $#error $: $1
R<$* <TMPF>> <$*> $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$+> <$*> $#error $: $1



######################################################################
### check_mail -- check SMTP `MAIL FROM:' command argument
######################################################################

SLocal_check_mail
Scheck_mail
R$* $: $1 $| $>"Local_check_mail" $1
R$* $| $#$* $#$2
R$* $| $* $@ $>"Basic_check_mail" $1

SBasic_check_mail
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2

# authenticated?
R$* $: $1 $| $>"tls_client" $&{verify} $| MAIL
R$* $| $#$+ $#$2
R$* $| $* $: $1

R<> $@ <OK> we MUST accept <> (RFC 1123)
R$+ $: <?> $1
R<?><$+> $: <@> <$1>
R<?>$+ $: <@> <$1>
R$* $: $&{daemon_flags} $| $1
R$* f $* $| <@> < $* @ $- > $: < ? $&{client_name} > < $3 @ $4 >
R$* u $* $| <@> < $* > $: <?> < $3 >
R$* $| $* $: $2
# handle case of @localhost on address
R<@> < $* @ localhost > $: < ? $&{client_name} > < $1 @ localhost >
R<@> < $* @ [127.0.0.1] >
$: < ? $&{client_name} > < $1 @ [127.0.0.1] >
R<@> < $* @ localhost.$m >
$: < ? $&{client_name} > < $1 @ localhost.$m >
R<@> < $* @ localhost.UUCP >
$: < ? $&{client_name} > < $1 @ localhost.UUCP >
R<@> $* $: $1 no localhost as domain
R<? $=w> $* $: $2 local client: ok
R<? $+> <$+> $#error $@ 5.5.4 $: "553 Real domain name required for sender address"
R<?> $* $: $1
R$* $: <?> $>CanonAddr $1 canonify sender address and mark it
R<?> $* < @ $+ . > <?> $1 < @ $2 > strip trailing dots
# handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
R<?> $* < @ $* $=P > $: <OKR> $1 < @ $2 $3 >
R<?> $* < @ $j > $: <OKR> $1 < @ $j >
R<?> $* < @ $+ > $: <? $(resolve $2 $: $2 <PERM> $) > $1 < @ $2 >
R<? $* <$->> $* < @ $+ >
$: <$2> $3 < @ $4 >

# check sender address: user@address, user@, address
R<$+> $+ < @ $* > $: @<$1> <$2 < @ $3 >> $| <F:$2@$3> <U:$2@> <D:$3>
R<$+> $+ $: @<$1> <$2> $| <U:$2@>
R@ <$+> <$*> $| <$+> $: <@> <$1> <$2> $| $>SearchList <+ From> $| <$3> <>
R<@> <$+> <$*> $| <$*> $: <$3> <$1> <$2> reverse result
# retransform for further use
R<?> <$+> <$*> $: <$1> $2 no match
R<$+> <$+> <$*> $: <$1> $3 relevant result, keep it

# handle case of no @domain on address
R<?> $* $: $&{daemon_flags} $| <?> $1
R$* u $* $| <?> $* $: <OKR> $3
R$* $| $* $: $2
R<?> $* $: < ? $&{client_addr} > $1
R<?> $* $@ <OKR> ...local unqualed ok
R<? $+> $* $#error $@ 5.5.4 $: "553 Domain name required for sender address " $&f
...remote is not
# check results
R<?> $* $: @ $1 mark address: nothing known about it
R<$={ResOk}> $* $@ <OKR> domain ok: stop
R<TEMP> $* $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
R<PERM> $* $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"
R<$={Accept}> $* $# $1 accept from access map
R<DISCARD> $* $#discard $: discard
R<QUARANTINE:$+> $* $#error $@ quarantine $: $1
R<REJECT> $* $#error $@ 5.7.1 $: "550 Access denied"
R<ERROR:$-.$-.$-:$+> $* $#error $@ $1.$2.$3 $: $4
R<ERROR:$+> $* $#error $: $1
R<<TMPF>> $* $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$+> $* $#error $: $1 error from access db

######################################################################
### check_rcpt -- check SMTP `RCPT TO:' command argument
######################################################################

SLocal_check_rcpt
Scheck_rcpt
R$* $: $1 $| $>"Local_check_rcpt" $1
R$* $| $#$* $#$2
R$* $| $* $@ $>"Basic_check_rcpt" $1

SBasic_check_rcpt
# empty address?
R<> $#error $@ nouser $: "553 User address required"
R$@ $#error $@ nouser $: "553 User address required"
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2


######################################################################
R$* $: $1 $| @ $>"Rcpt_ok" $1
R$* $| @ $#TEMP $+ $: $1 $| T $2
R$* $| @ $#$* $#$2
R$* $| @ RELAY $@ RELAY
R$* $| @ $* $: O $| $>"Relay_ok" $1
R$* $| T $+ $: T $2 $| $>"Relay_ok" $1
R$* $| $#TEMP $+ $#error $2
R$* $| $#$* $#$2
R$* $| RELAY $@ RELAY
R T $+ $| $* $#error $1
# anything else is bogus
R$* $#error $@ 5.7.1 $: "550 Relaying denied"


######################################################################
### Rcpt_ok: is the recipient ok?
######################################################################
SRcpt_ok
R$* $: $>ParseRecipient $1 strip relayable hosts




# authenticated via TLS?
R$* $: $1 $| $>RelayTLS client authenticated?
R$* $| $# $+ $# $2 error/ok?
R$* $| $* $: $1 no

R$* $: $1 $| $>"Local_Relay_Auth" $&{auth_type}
R$* $| $# $* $# $2
R$* $| NO $: $1
R$* $| $* $: $1 $| $&{auth_type}
R$* $| $: $1
R$* $| $={TrustAuthMech} $# RELAY
R$* $| $* $: $1
# anything terminating locally is ok
R$+ < @ $=w > $@ RELAY
R$+ < @ $* $=R > $@ RELAY
R$+ < @ $+ > $: $>D <$2> <?> <+ To> <$1 < @ $2 >>
R<RELAY> $* $@ RELAY
R<$* <TMPF>> $* $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*> $: $2



# check for local user (i.e. unqualified address)
R$* $: <?> $1
R<?> $* < @ $+ > $: <REMOTE> $1 < @ $2 >
# local user is ok
R<?> $+ $@ RELAY
R<$+> $* $: $2

######################################################################
### Relay_ok: is the relay/sender ok?
######################################################################
SRelay_ok
# anything originating locally is ok
# check IP address
R$* $: $&{client_addr}
R$@ $@ RELAY originated locally
R0 $@ RELAY originated locally
R127.0.0.1 $@ RELAY originated locally
RIPv6:::1 $@ RELAY originated locally
R$=R $* $@ RELAY relayable IP address
R$* $: $>A <$1> <?> <+ Connect> <$1>
R<RELAY> $* $@ RELAY relayable IP address

R<<TMPF>> $* $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*> $: $2
R$* $: [ $1 ] put brackets around it...
R$=w $@ RELAY ... and see if it is local


# check client name: first: did it resolve?
R$* $: < $&{client_resolve} >
R<TEMP> $#TEMP $@ 4.4.0 $: "450 Relaying temporarily denied. Cannot resolve PTR record for " $&{client_addr}
R<FORGED> $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
R<FAIL> $#error $@ 5.7.1 $: "550 Relaying denied. IP name lookup failed " $&{client_name}
R$* $: <@> $&{client_name}
# pass to name server to make hostname canonical
R<@> $* $=P $:<?> $1 $2
R<@> $+ $:<?> $[ $1 $]
R$* . $1 strip trailing dots
R<?> $=w $@ RELAY
R<?> $* $=R $@ RELAY
R<?> $* $: $>D <$1> <?> <+ Connect> <$1>
R<RELAY> $* $@ RELAY
R<$* <TMPF>> $* $#TEMP $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<$*> <$*> $: $2


######################################################################
### F: LookUpFull -- search for an entry in access database
###
### lookup of full key (which should be an address) and
### variations if +detail exists: +* and without +detail
###
### Parameters:
### <$1> -- key
### <$2> -- default (what to return if not found in db)
### <$3> -- mark (must be <(!|+) single-token>)
### ! does lookup only with tag
### + does lookup with and without tag
### <$4> -- passthru (additional data passed unchanged through)
######################################################################

SF
R<$+> <$*> <$- $-> <$*> $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*> $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+ + $* @ $+> <$*> <$- $-> <$*>
$: <$(access $6:$1+*@$3 $: ? $)> <$1+$2@$3> <$4> <$5 $6> <$7>
R<?> <$+ + $* @ $+> <$*> <+ $-> <$*>
$: <$(access $1+*@$3 $: ? $)> <$1+$2@$3> <$4> <+ $5> <$6>
R<?> <$+ + $* @ $+> <$*> <$- $-> <$*>
$: <$(access $6:$1@$3 $: ? $)> <$1+$2@$3> <$4> <$5 $6> <$7>
R<?> <$+ + $* @ $+> <$*> <+ $-> <$*>
$: <$(access $1@$3 $: ? $)> <$1+$2@$3> <$4> <+ $5> <$6>
R<?> <$+> <$*> <$- $-> <$*> $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*> $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*> $@ <$1> <$5>

######################################################################
### E: LookUpExact -- search for an entry in access database
###
### Parameters:
### <$1> -- key
### <$2> -- default (what to return if not found in db)
### <$3> -- mark (must be <(!|+) single-token>)
### ! does lookup only with tag
### + does lookup with and without tag
### <$4> -- passthru (additional data passed unchanged through)
######################################################################

SE
R<$*> <$*> <$- $-> <$*> $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*> $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+> <$*> <$- $-> <$*> $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*> $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*> $@ <$1> <$5>

######################################################################
### U: LookUpUser -- search for an entry in access database
###
### lookup of key (which should be a local part) and
### variations if +detail exists: +* and without +detail
###
### Parameters:
### <$1> -- key (user@)
### <$2> -- default (what to return if not found in db)
### <$3> -- mark (must be <(!|+) single-token>)
### ! does lookup only with tag
### + does lookup with and without tag
### <$4> -- passthru (additional data passed unchanged through)
######################################################################

SU
R<$+> <$*> <$- $-> <$*> $: <$(access $4:$1 $: ? $)> <$1> <$2> <$3 $4> <$5>
R<?> <$+> <$*> <+ $-> <$*> $: <$(access $1 $: ? $)> <$1> <$2> <+ $3> <$4>
R<?> <$+ + $* @> <$*> <$- $-> <$*>
$: <$(access $5:$1+*@ $: ? $)> <$1+$2@> <$3> <$4 $5> <$6>
R<?> <$+ + $* @> <$*> <+ $-> <$*>
$: <$(access $1+*@ $: ? $)> <$1+$2@> <$3> <+ $4> <$5>
R<?> <$+ + $* @> <$*> <$- $-> <$*>
$: <$(access $5:$1@ $: ? $)> <$1+$2@> <$3> <$4 $5> <$6>
R<?> <$+ + $* @> <$*> <+ $-> <$*>
$: <$(access $1@ $: ? $)> <$1+$2@> <$3> <+ $4> <$5>
R<?> <$+> <$*> <$- $-> <$*> $@ <$2> <$5>
R<$+ <TMPF>> <$*> <$- $-> <$*> $@ <<TMPF>> <$5>
R<$+> <$*> <$- $-> <$*> $@ <$1> <$5>

######################################################################
### SearchList: search a list of items in the access map
### Parameters:
### <exact tag> $| <mark:address> <mark:address> ... <>
### where "exact" is either "+" or "!":
### <+ TAG> lookup with and w/o tag
### <! TAG> lookup with tag
### possible values for "mark" are:
### D: recursive host lookup (LookUpDomain)
### E: exact lookup, no modifications
### F: full lookup, try user+ext@domain and user@domain
### U: user lookup, try user+ext and user (input must have trailing @)
### return: <RHS of lookup> or <?> (not found)
######################################################################

# class with valid marks for SearchList
C{Src}E F D U
SSearchList
# just call the ruleset with the name of the tag... nice trick...
R<$+> $| <$={Src}:$*> <$*> $: <$1> $| <$4> $| $>$2 <$3> <?> <$1> <>
R<$+> $| <> $| <?> <> $@ <?>
R<$+> $| <$+> $| <?> <> $@ $>SearchList <$1> $| <$2>
R<$+> $| <$*> $| <$+> <> $@ <$3>
R<$+> $| <$+> $@ <$2>


######################################################################
### trust_auth: is user trusted to authenticate as someone else?
###
### Parameters:
### $1: AUTH= parameter from MAIL command
######################################################################

SLocal_trust_auth
Strust_auth
R$* $: $&{auth_type} $| $1
# required by RFC 2554 section 4.
R$@ $| $* $#error $@ 5.7.1 $: "550 not authenticated"
R$* $| $&{auth_authen} $@ identical
R$* $| <$&{auth_authen}> $@ identical
R$* $| $* $: $1 $| $>"Local_trust_auth" $2
R$* $| $#$* $#$2
R$* $#error $@ 5.7.1 $: "550 " $&{auth_authen} " not allowed to act as " $&{auth_author}

######################################################################
### Relay_Auth: allow relaying based on authentication?
###
### Parameters:
### $1: ${auth_type}
######################################################################
SLocal_Relay_Auth

######################################################################
### srv_features: which features to offer to a client?
### (done in server)
######################################################################
Ssrv_features
R$* $: $>D <$&{client_name}> <?> <! "Srv_Features"> <>
R<?>$* $: $>A <$&{client_addr}> <?> <! "Srv_Features"> <>
R<?>$* $: <$(access "Srv_Features": $: ? $)>
R<?>$* $@ OK
R<$* <TMPF>>$* $#temp
R<$+>$* $# $1

######################################################################
### try_tls: try to use STARTTLS?
### (done in client)
######################################################################
Stry_tls
R$* $: $>D <$&{server_name}> <?> <! "Try_TLS"> <>
R<?>$* $: $>A <$&{server_addr}> <?> <! "Try_TLS"> <>
R<?>$* $: <$(access "Try_TLS": $: ? $)>
R<?>$* $@ OK
R<$* <TMPF>>$* $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R<NO>$* $#error $@ 5.7.1 $: "550 do not try TLS with " $&{server_name} " ["$&{server_addr}"]"

######################################################################
### tls_rcpt: is connection with server "good" enough?
### (done in client, per recipient)
###
### Parameters:
### $1: recipient
######################################################################
Stls_rcpt
R$* $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$+ $: <?> $>CanonAddr $1
R<?> $+ < @ $+ . > <?> $1 <@ $2 >
R<?> $+ < @ $+ > $: $1 <@ $2 > $| <F:$1@$2> <U:$1@> <D:$2> <E:>
R<?> $+ $: $1 $| <U:$1@> <E:>
R$* $| $+ $: $1 $| $>SearchList <! "TLS_Rcpt"> $| $2 <>
R$* $| <?> $@ OK
R$* $| <$* <TMPF>> $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$* $| <$+> $@ $>"TLS_connection" $&{verify} $| <$2>

######################################################################
### tls_client: is connection with client "good" enough?
### (done in server)
###
### Parameters:
### ${verify} $| (MAIL|STARTTLS)
######################################################################
Stls_client
R$* $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$* $| $* $: $1 $| $>D <$&{client_name}> <?> <! "TLS_Clt"> <>
R$* $| <?>$* $: $1 $| $>A <$&{client_addr}> <?> <! "TLS_Clt"> <>
R$* $| <?>$* $: $1 $| <$(access "TLS_Clt": $: ? $)>
R$* $| <$* <TMPF>> $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$* $@ $>"TLS_connection" $1

######################################################################
### tls_server: is connection with server "good" enough?
### (done in client)
###
### Parameter:
### ${verify}
######################################################################
Stls_server
R$* $: $(macro {TLS_Name} $@ $&{server_name} $) $1
R$* $: $1 $| $>D <$&{server_name}> <?> <! "TLS_Srv"> <>
R$* $| <?>$* $: $1 $| $>A <$&{server_addr}> <?> <! "TLS_Srv"> <>
R$* $| <?>$* $: $1 $| <$(access "TLS_Srv": $: ? $)>
R$* $| <$* <TMPF>> $#error $@ 4.3.0 $: "451 Temporary system failure. Please try again later."
R$* $@ $>"TLS_connection" $1

######################################################################
### TLS_connection: is TLS connection "good" enough?
###
### Parameters:
### ${verify} $| <Requirement> [<>]
### Requirement: RHS from access map, may be ? for none.
######################################################################
STLS_connection
R$* $| <$*>$* $: $1 $| <$2>
# create the appropriate error codes
R$* $| <PERM + $={Tls} $*> $: $1 $| <503:5.7.0> <$2 $3>
R$* $| <TEMP + $={Tls} $*> $: $1 $| <403:4.7.0> <$2 $3>
R$* $| <$={Tls} $*> $: $1 $| <403:4.7.0> <$2 $3>
# deal with TLS handshake failures: abort
RSOFTWARE $| <$-:$+> $* $#error $@ $2 $: $1 " TLS handshake failed."
RSOFTWARE $| $* $#error $@ 4.7.0 $: "403 TLS handshake failed."
R$* $| <

[ghost807]

i have also contacted 1and1 to see if i'm using the wrong info to connect to their server.

thanx

[ghost807]

i've done some looking into the wiki and i don't completely understand
http://www.scalix.com/wiki/index.php?ti ... h_sendmail
the build database section does nothing on my suse 10.0

the next section talks about the sendmail.mc but it is not in that location.
i think this is what you want me to do but once again i'm not sure.

i have also tried this item as well but with no luck
http://www.scalix.com/community/viewtopic.php?t=4249
thanx
Dave

[ScalixSupport]

Your sendmail.cf file already contains instructions on where to look for authentication information...

# default authentication information for outgoing connections
#O DefaultAuthInfo=/etc/mail/default-auth-info

In /etc/mail create a file called default-auth-info and enter:

Code: Select all

AuthInfo:smtp.domain.com "U:loginname" "I:loginname" "P:password"

Input the info requied by your isp. Restart sendmail.

1and1 couldn't help you with this?

Thanks,
Don

[ghost807]

Sorry i haven't posted my current sendmail.cf file or my current client info file.
i do have this uncommented but i receive an error(550) from 1and1 servers saying i must be logged in and the email is rejected.
the first person i talked to didn't know what sendmail was but after 1/2 an hour i did get someone who seemed to know a little bit about it.

# default authentication information for outgoing connections
O DefaultAuthInfo=/etc/mail/auth1/client-info

AuthInfo:smtp.1and1.com "U:loginname" "I:loginname" "P:password"

i have just uninstalled scalix and am trying to follow this howto
http://www.howtoforge.com/howto_sendmail_smtp_auth_tls

once i get this working i'm will try to reinstall scalix and see if that works correctly.
thanx
dave

[ghost807]

Well, i think i'm getting this to work correctly. it's kind of frustrating but i've learned quite a bit but now it's time to get this done.

Here's what i have done to this point.
uninstalled scalix
uninstalled sendmail
reinstall sendmail following the post from
http://www.howtoforge.com/howto_sendmail_smtp_auth_tls

next i reinstalled scalix

i checked to see if both smtp's are responding as they should be

telnet x
telnet localhost 25
220 linuxmail.syseqco.local ESMTP
ehlo localhost
250 linuxmail.syseqco.local hello localhost[127.0.0.1], please to meet you
250-ENHANC4EDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE 15000000
250-DSN
250-ETRN
250-AUTH LOGIN PLAIN DIGEST-MD5 CRAM-MD5
250-STARTTLS
250-DELIVERBY
250-HELP


telnet 192.168.1.24 25
220 linuxmail.syseqco.local ESMTP Scalix SMTP Relay 10.0.1.3; Wed, 25 Oct 2006 09:50:16 -0500 (CDT)
ehlo localhost
250 linuxmail.syseqco.local hello linuxmail.syseqco.local[192.168.1.24], please to meet you
250-AUTH LOGIN PLAIN DIGEST-MD5 CRAM-MD5
250-AUTH=LOGIN
250-DSN
250-8BITMIME

It seems everything is working correctly, now i still need just a little help.
when i try to send outgoing email i receive this error

Code: Select all

Message could not be delivered to the following recipient:

    david.enyart@anotherdoamin.org

    because: A mail transport failure occurred


Supplementary Information:


    WARNING: RunAsUser for MSP ignored, check group ids (egid=12, want=100)



i know what it is based on this post http://www.scalix.com/community/viewtop ... sp+ignored but i don't know how he corrected the issue.
if it's a setting inside sendmail or the folder or both.
thanx for you help
dave

[ScalixSupport]

I just looked at your sendmail.cf again and noticed:

#O DefaultAuthInfo=/etc/mail/default-auth-info

This line is commented out. Please remove the # and restart sendmail.

Thanks,
Don