Difference between revisions of "HowTos/Complete Postfix"

Revision as of 01:45, 2 June 2007

If you hate sendmail as much as I do, you've probably been wanting to switch it out with postfix for a while.

Here's the quick and dirty on how to do that.

When you finish this howto you'll have achieved the following:

- sendmail will be gone - postfix will accept incoming mail from authenticated clients - postfix will virus-scan incoming mail - postfix will deliver incoming mail that belongs to local-users to scalix

conventions

throughout this document, $FQDN means the fully qualified domain name of your serfer

installing postfix

first you'll need to install postfix and ditch sendmail.

redhat:

rpm -ivh postfix system-switch-mail system-switch-mail, select postfix, and ok

set postfix to listen on the external ip, omsmtpd to a high port

add the line LISTEN=$FQDN:10025 to your /var/opt/scalix/*/s/sys/smtpd.cfg omoff -d0 -w smtpd; omon smtpd to activate the config

remove the line inet_interfaces = localhost from /etc/postfix/main.cf /etc/init.d/postfix reload

set up transport

you'll want postfix to check which addresses belong to scalix and deliver email there. to do this, create the file /etc/postfix/scalix-transport.cf and fill it with:

server_host = ldap://localhost:5757
query_filter = mail=%s
bind = no
result_attribute = scalixInstanceMailHost
result_format = smtp:[%s]:10025
size_limiti = 1
domain = scalix.demo

then add the line transport_maps = ldap:/etc/postfix/scalix-transport.cf to your /etc/postfix/main.cf

now postfix has replaced sendmail. however, it needs to fully replace omsmtpd as well, so it should authenticate

setting up smtp-auth

ensure that cyrus-sasl, cyrus-sasl-md5 and cyrus-sasl-plain are installed.

we'll use saslauthd to authenticate against scalix's ldap directory. first let's set saslauthd up to do ldap by setting MECH=ldap in /etc/sysconfig/saslauthd. Change the location of saslauthd's conf file and enable caching by setting FLAGS="-O /etc/postfix/saslauthd.conf -c -m /var/spool/postfix/var/run/saslauthd" in the same file. Also set saslauthd to start at boot /sbin/chkconfig --level 345 saslauthd on

create the directory /etc/postfix/sasl2/ and edit /etc/postfix/sasl2/smtpd.conf with the following:

pwcheck_method: saslauthd
mech_list: PLAIN LOGIN
log_level: 5
saslauthd_path: /var/run/saslauthd/mux
auxprop_plugin: ldap

now we need to configure our ldap parameters in /etc/postfix/saslauthd.conf:

ldap_servers: ldap://localhost:389/
ldap_search_base: o=Scalix
ldap_auth_method: bind
ldap_filter: omUlAuthid=%u
ldap_version: 3
ldap_bind_dn: cn=sxadmin,o=scalix
ldap_bind_pw: super_secret

now we configure postfix to use sasl in the main.cf:

smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes

and we configure postfix to require sasl:

smtpd_client_restrictions =
                permit_mynetworks
                permit_sasl_authenticated
                reject

smtpd_sender_restrictions =
                permit_mynetworks
                permit_sasl_authenticated
                reject

smtpd_recipient_restrictions =
                permit_mynetworks
                permit_sasl_authenticated
                reject_unauth_destination

now that we do authenticated smtp, we should be encrypting as well

in order to encrypt smtp communication, you'll need a certificate. if you've never generated one before, http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/Deployment_Guide-en-US/s1-httpd-secure-server.html should be a pretty good starting place to get a handle on how ssl is working.

if you have generated a certificate before, either use that one or do it again. come back when you have your certificate and place it in /etc/ssl. I'll call it keyfile for simplicity's sake.

configure postfix to do tls, and to require tls for authenticated sessions:

smtpd_use_tls = yes smtpd_tls_auth_only = yes smtpd_tls_key_file = /etc/ssl/key.pem smtpd_tls_cert_file = /etc/ssl/cert.pem smtpd_tls_CAfile = /etc/ssl/cacert.pem smtpd_tls_security_level = may smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom

time to take on spam and virii

unfortunately, what to do about a/v on rhel is not cut and dry. i'd recommend installing amavisd-new via apt.

get apt and rpmforge from http://dag.wieers.com/rpm/packages/apt/ and http://dag.wieers.com/rpm/packages/rpmforge-release/

install both rpms, apt-get update, then apt-get install clamav clamd spamassassin razor-agents perl-Razor-Agent amavisd-new will get you a nice set of anti-spam and anti-virus tools.

start amavisd with /etc/init.d/amavisd start

add the following to the bottom of /etc/postfix/master.cf

smtp-amavis unix -      -       n     -       2  smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes
    -o disable_dns_lookups=yes
    -o max_use=20

127.0.0.1:10025 inet n  -       n     -       -  smtpd
    -o content_filter=
    -o smtpd_restriction_classes=
    -o smtpd_delay_reject=no
    -o smtpd_client_restrictions=permit_mynetworks,reject
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o smtpd_data_restrictions=reject_unauth_pipelining
    -o smtpd_end_of_data_restrictions=
    -o mynetworks=127.0.0.0/8
    -o smtpd_error_sleep_time=0
    -o smtpd_soft_error_limit=1001
    -o smtpd_hard_error_limit=1000
    -o smtpd_client_connection_count_limit=0
    -o smtpd_client_connection_rate_limit=0
    -o smtpd_milters=
    -o local_header_rewrite_clients=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks

instruct postfix to use amavisd as a content filter by adding the following to /etc/postfix/main.cf

content_filter=smtp-amavis:[127.0.0.1]:10024

Now that postfix and amavis are playing together, it's time to make a couple of specific settings

tuning amavisd

in /etc/amavisd.conf

set your domain name $mydomain = 'scalix.demo';

uncomment the clamav virus scanner which we installed

 ['ClamAV-clamd',
   \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd"],
   qr/\bOK$/, qr/\bFOUND$/,
   qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],