I was running Scalix 11.0.2 on FC 5 with no issues. I downloaded Scalix Community 11.0.4 and ran the installer as an upgrade. Since then I have not been able to access SAC. I get Error 503. SELinux is disabled. The output from omshowlog -l 3 is:
ERROR Queue Manager (Queue Manager ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
Current errno value: 4
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
<- qm_RespondToExpectantReaders
-> qm_ProcessGetHighestSeq
<- /build/scalix-MAIN/src/bin/qm/qm_actions.c:676[116,1011]
ERROR Queue Manager (Queue Manager ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
Current errno value: 4
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
-> ql_GetNextMsgDue
<- ql_GetNextMsgDue
<- qm_RespondToExpectantReaders
-> qm_ProcessGetHighestSeq
<- /build/scalix-MAIN/src/bin/qm/qm_actions.c:676[116,1011]
ERROR Administration(omstat ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
SERIOUS ERROR Administration(omstat ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
Current errno value: 42
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> stat_DisplayQueueStatus
-> im_CrNewTempItem
-> im_GetNewTempItemNum
<- im_GetNewTempItemNum
<- im_CrNewTempItem
<- /build/scalix-MAIN/src/lib/qml/qml_ipc.c:178[116,1011]
ERROR Administration(omstat ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
SERIOUS ERROR Administration(omstat ) 12.23.06 20:05:44
[OM.DMON 1011] A queue name specified does not exist.
Current errno value: 42
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> stat_DisplayQueueStatus
-> im_CrNewTempItem
-> im_GetNewTempItemNum
<- im_GetNewTempItemNum
<- im_CrNewTempItem
<- /build/scalix-MAIN/src/lib/qml/qml_ipc.c:178[116,1011]
SERIOUS ERROR CDA Server (CDA Server ) 12.28.06 13:40:58
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
SERIOUS ERROR CDA Server (CDA Server ) 01.03.07 13:59:34
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
ERROR Browser (Service 14 ) 01.07.07 13:10:04
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeIo0Skp 00011200c94ab9d6
ERROR Browser (Service 14 ) 01.07.07 13:10:04
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeCS1Qhs 00011200c94ab9d6
ERROR Browser (Service 14 ) 01.07.07 13:10:04
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeaz4nlv 00011200c94ab9d6
ERROR Browser (Service 14 ) 01.07.07 13:10:05
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeCC1Jwy 00011200c94ab9d6
ERROR Administration(omaddpdln ) 01.08.07 05:42:10
[OM 18022] The name is already in the PDL
<- dr_ACIModContextFlags
-> dr_ACICheckReadPerm
<- dr_ACICheckReadPerm
-> dr_ACIModContextFlags
<- dr_ACIModContextFlags
-> dr_ACIModContextFlags
<- dr_ACIModContextFlags
-> dr_ACICheckReadPerm
<- dr_ACICheckReadPerm
-> dr_ACIModContextFlags
<- dr_ACIModContextFlags
<- /build/scalix-MAIN/src/lib/ombase/dr/dr_PDLAdd.c:921[3,18022]
<- /build/scalix-MAIN/src/lib/ombase/dr/dr_PDLAdd.c:1037[3,18022]
<- /build/scalix-MAIN/src/bin/pdl/pdl_addnm.c:570[3,18022]
<- /build/scalix-MAIN/src/bin/pdl/pdl_addnm.c:585[3,18022]
ERROR Browser (Service 14 ) 02.02.07 09:11:48
[OM 0]
Last Msg Id: 17428768.1170429074889.JavaMail.mms(a)rlysnq15
Last Msg DirectRef: 00011c8b51350151
ERROR Browser (Service 14 ) 02.02.07 09:15:32
[OM 0]
Last Msg Id: 26724524.1170429282755.JavaMail.mms(a)rlysnq07
Last Msg DirectRef: 00011c8c6245224e
ERROR Browser (Service 14 ) 02.02.07 09:43:31
[OM 0]
Last Msg Id: 915542.1170430966040.JavaMail.mms(a)rlysnq17
Last Msg DirectRef: 00011c8d38f03e57
ERROR Browser (Service 14 ) 02.02.07 09:44:34
[OM 0]
Last Msg Id: 8514371.1170431045974.JavaMail.mms(a)rlysnq16
Last Msg DirectRef: 00011c8e3ddd6fd4
ERROR Browser (Service 14 ) 02.02.07 11:02:42
[OM 0]
Last Msg Id: 9622859.1170435711057.JavaMail.mms(a)rlysnq21
Last Msg DirectRef: 00011c923e1e3d2f
ERROR Browser (Service 14 ) 02.02.07 11:03:07
[OM 0]
Last Msg Id: 7639180.1170435773104.JavaMail.mms(a)rlysnq27
Last Msg DirectRef: 00011c9333d6840e
ERROR Browser (Service 14 ) 02.02.07 11:24:27
[OM 0]
Last Msg Id: 4555060.1170437019286.JavaMail.mms(a)rlysnq26
Last Msg DirectRef: 00011c946ed26e25
ERROR Browser (Service 14 ) 02.02.07 11:27:19
[OM 0]
Last Msg Id: 5941142.1170437194188.JavaMail.mms(a)rlysnq14
Last Msg DirectRef: 00011c957a4cb638
ERROR Browser (Service 14 ) 02.03.07 15:53:44
[OM 0]
Last Msg Id: 25038114.1170539563820.JavaMail.mms(a)rlysnq25
Last Msg DirectRef: 00011cade3360816
ERROR Browser (Service 14 ) 02.08.07 19:13:38
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeRgFDVQ 0001078146adab69
Last Msg Id: 5gm4au(036)15u38mv(a)clmboh-mx-12.mgw.rr.com
Last Msg DirectRef: 000102ee39a9695d
ERROR Browser (Service 14 ) 02.08.07 19:13:38
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeKgo9GM 0001078146adab69
Last Msg Id: AG00-TJUTILITYJxArG0036100b(a)mail3.thingamajob.com
Last Msg DirectRef: 000102efd77673a9
ERROR Browser (Service 14 ) 02.08.07 19:13:38
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeHQVatI 0001078146adab69
Last Msg Id: OTHR(u)ICS5413503(a)met-scoremedia.net
Last Msg DirectRef: 000102f0e62e03fd
ERROR Browser (Service 14 ) 02.08.07 19:13:38
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mime8RlJfE 0001078146adab69
Last Msg Id: mImrtGpJJpbfQfurfPAgCdDgdtCrmIIm(a)offersan.com
Last Msg DirectRef: 000102f1940fdf62
ERROR Browser (Service 14 ) 02.13.07 10:50:32
[OM 0]
Last Msg Id: 24508957.1171385420202.JavaMail.mms(a)rlysnq20
Last Msg DirectRef: 000107d72197b837
ERROR Browser (Service 14 ) 02.13.07 10:51:19
[OM 0]
Last Msg Id: 27863618.1171385468043.JavaMail.mms(a)rlysnq15
Last Msg DirectRef: 000107d8e63761cc
ERROR Browser (Service 14 ) 02.13.07 10:59:27
[OM 0]
Last Msg Id: 13688637.1171385952984.JavaMail.mms(a)rlysnq03
Last Msg DirectRef: 000107d90d09961e
ERROR Browser (Service 14 ) 02.13.07 10:59:41
[OM 0]
Last Msg Id: 13688637.1171385952984.JavaMail.mms(a)rlysnq03
Last Msg DirectRef: 000107d90d09961e
ERROR Browser (Service 14 ) 02.13.07 12:47:44
[OM 0]
Last Msg Id: 21723482.1171392453207.JavaMail.mms(a)rlysnq04
Last Msg DirectRef: 000107da6a1e8e8f
ERROR Omscan Server (Omscan Server ) 03.11.07 04:56:22
[SYS 9] Bad file descriptor
Current errno value: 9
-> scn_ServerDelayStop
<- scn_ServerDelayStop
<- scn_ServerTrapSignal
-> scn_ServerDelayStop
<- scn_ServerDelayStop
<- scn_StatusUnlockArea
<- scn_ServerGetRequest
<- scn_ServerDoProcessing
-> scn_StatusUnloadArea
<- scn_StatusUnloadArea
<- scn_ServerMain
-> scn_ServerTrapSignal
-> scn_ServerDelayStop
<- scn_ServerDelayStop
-> scn_StatusUnloadArea
<- /build/scalix-MAIN/src/lib/ombase/os/os_close.c:45[1,9]
SERIOUS ERROR CDA Server (CDA Server ) 03.11.07 04:58:55
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
SERIOUS ERROR CDA Server (CDA Server ) 03.11.07 05:34:03
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
SERIOUS ERROR CDA Server (CDA Server ) 03.11.07 07:00:01
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
ERROR Omscan Server (Omscan Server ) 03.19.07 20:17:01
[SYS 9] Bad file descriptor
Current errno value: 9
-> scn_ServerDelayStop
<- scn_ServerDelayStop
<- scn_ServerTrapSignal
-> scn_ServerDelayStop
<- scn_ServerDelayStop
<- scn_StatusUnlockArea
<- scn_ServerGetRequest
<- scn_ServerDoProcessing
-> scn_StatusUnloadArea
<- scn_StatusUnloadArea
<- scn_ServerMain
-> scn_ServerTrapSignal
-> scn_ServerDelayStop
<- scn_ServerDelayStop
-> scn_StatusUnloadArea
<- /build/scalix-MAIN/src/lib/ombase/os/os_close.c:45[1,9]
ERROR Browser (Service 14 ) 03.30.07 13:50:25
[OM 0]
Last Msg Id: 1059367.1175276708354.JavaMail.mms(a)rlysnq13
Last Msg DirectRef: 0001156e3340da63
ERROR Browser (Service 14 ) 03.30.07 13:50:39
[OM 0]
Last Msg Id: 1059367.1175276708354.JavaMail.mms(a)rlysnq13
Last Msg DirectRef: 0001156e3340da63
ERROR Browser (Service 14 ) 03.30.07 20:24:36
[OM 0]
Last Msg Id: 20224462.1175300661205.JavaMail.mms(a)rlysnq02
Last Msg DirectRef: 000115710730ac6d
ERROR Browser (Service 14 ) 04.07.07 10:40:13
[OM 0]
Last Msg Id: 16370468.1175956674654.JavaMail.mms(a)rlysnq14
Last Msg DirectRef: 000111c88ad30ba1
ERROR Browser (Service 14 ) 04.07.07 11:00:13
[OM 0]
Last Msg Id: 11659728.1175957625725.JavaMail.mms(a)rlysnq27
Last Msg DirectRef: 000122bf1c5181be
ERROR Browser (Service 14 ) 04.07.07 11:00:29
[OM 0]
Last Msg Id: 11659728.1175957625725.JavaMail.mms(a)rlysnq27
Last Msg DirectRef: 000122bf1c5181be
SERIOUS ERROR CDA Server (CDA Server ) 04.28.07 13:07:25
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
ERROR Browser (Service 14 ) 04.30.07 20:30:19
[OM 0]
Last Msg Id: 20070501002414.BOBE21242.ibm59aec.bellsouth.net(a)mail.bellsouth.net
Last Msg DirectRef: 00010fd0aee62b64
ERROR Background Sea(Background Sea) 05.09.07 22:35:16
[OM 3418] The record number supplied is invalid.
-> sis_free
-> tf_CloseFile
<- tf_CloseFile
-> ct_RawOpenCtner
-> im_OpenItem
-> sfl_OpenItem
-> im_ItemRef2FName
<- im_ItemRef2FName
<- sfl_OpenItem
<- im_OpenItem
<- ct_RawOpenCtner 3001
-> ct_AddObjectFile
<- /build/scalix-MAIN/src/lib/ombase/sfl/sfl_Blcked.c:1394[100,28875]
<- /build/scalix-MAIN/src/lib/ombase/sfl/sfl_Blcked.c:1697[100,28875]
<- /build/scalix-MAIN/src/lib/ct/ct_Object.c:860[3,3418]
<- /build/scalix-MAIN/src/lib/ct/ct_Object.c:878[3,3418]
SERIOUS ERROR CDA Server (CDA Server ) 05.10.07 20:28:19
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
ERROR Browser (Service 14 ) 05.21.07 19:49:32
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimehTlnii 00014207b425cf19
Last Msg Id: 604A24242ADA49C09894476F57B21313(a)630
Last Msg DirectRef: 000125e596b8bc5c
ERROR Browser (Service 14 ) 05.21.07 19:49:32
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mime15ZzV2 00014207b425cf19
Last Msg Id: LA7E2A7059ACC483f9A232295765D58BE.1179787040.zephyr.genfam.info
Last Msg DirectRef: 00012b6fc65e04c6
ERROR Browser (Service 14 ) 05.21.07 19:49:32
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimela79yN 00014207b425cf19
Last Msg Id: 200705212046.l4LKkC6k014940(a)alpha.ryze.com
Last Msg DirectRef: 000125e1a80a24a4
ERROR Browser (Service 14 ) 05.21.07 19:49:32
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeJ0P7cy 00014207b425cf19
Last Msg Id: 20070521.31722911(a)tampabay.rr.com
Last Msg DirectRef: 00013a27fae48c29
ERROR Browser (Service 14 ) 05.29.07 07:54:10
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mime46jlTq 00013e45c55abfff
Last Msg Id: LYRIS-2058616-2230793-2007.05.29-02.00.02--mark.kosinski(035)genfam.info(a)nwdmail.com
Last Msg DirectRef: 0001277c41702fd4
ERROR Browser (Service 14 ) 05.29.07 07:54:10
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeGIvF8V 00013e45c55abfff
Last Msg Id: 20070529084846.A26DC1B66F(a)web8.gemini.dice.com
Last Msg DirectRef: 0001277dbc093939
ERROR Browser (Service 14 ) 05.29.07 07:54:11
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeqgwwvr 00013e45c55abfff
Last Msg Id: 465C03E5.3070108(a)verizon.net
Last Msg DirectRef: 0001330ebbdc1846
ERROR Browser (Service 14 ) 05.29.07 07:54:11
[OM.MIME 4000] Browser Args :index.browse -c -o /var/opt/scalix/zr/s/temp/mime_cache/mimeM9kb5W 00013e45c55abfff
Last Msg Id: 2199.10041180438608.zephyr.genfam.info
Last Msg DirectRef: 0001277599bb86fa
ERROR Browser (Service 14 ) 06.19.07 10:15:20
[OM 0]
Last Msg Id: 20070619140358.30034.qmail(a)kazaapro.info
Last Msg DirectRef: 00012fc02b0d08a3
ERROR Browser (Service 14 ) 06.20.07 09:25:21
[OM 0]
Last Msg Id: 20070620131421.10443.qmail(a)kazaapro.info
Last Msg DirectRef: 000142485e2528d4
ERROR Browser (Service 14 ) 06.20.07 09:25:36
[OM 0]
Last Msg Id: 20070620131421.10443.qmail(a)kazaapro.info
Last Msg DirectRef: 000142485e2528d4
ERROR Browser (Service 14 ) 06.25.07 08:50:21
[OM 0]
Last Msg Id: 20070625123900.5370.qmail(a)kazaapro.info
Last Msg DirectRef: 0001441843dea494
ERROR Browser (Service 14 ) 06.26.07 11:55:24
[OM 0]
Last Msg Id: 20070626154016.21193.qmail(a)kazaapro.info
Last Msg DirectRef: 000142551b8ec154
ERROR Browser (Service 14 ) 07.04.07 20:45:04
[OM 0]
Last Msg Id: 10155315.41420611183595992611.JavaMail.mms(a)rlyatl03.tmomail.net
Last Msg DirectRef: 00012bea7e62e849
ERROR Browser (Service 14 ) 07.04.07 20:45:17
[OM 0]
Last Msg Id: 10155315.41420611183595992611.JavaMail.mms(a)rlyatl03.tmomail.net
Last Msg DirectRef: 00012bea7e62e849
ERROR Browser (Service 14 ) 07.04.07 20:46:27
[OM 0]
Last Msg Id: 23585048.41428671183596073717.JavaMail.mms(a)rlyatl03.tmomail.net
Last Msg DirectRef: 000147031453cf93
ERROR Browser (Service 14 ) 07.04.07 20:47:29
[OM 0]
Last Msg Id: 2289904.42954861183596138050.JavaMail.mms(a)rlyatl17.tmomail.net
Last Msg DirectRef: 00014949e03aba5e
ERROR Browser (Service 14 ) 07.04.07 20:49:29
[OM 0]
Last Msg Id: 11416044.42668811183596257674.JavaMail.mms(a)rlyatl24.tmomail.net
Last Msg DirectRef: 00014285e154ff29
ERROR Browser (Service 14 ) 07.08.07 09:15:21
[OM 0]
Last Msg Id: 20070708131108.892.qmail(a)kazaapro.info
Last Msg DirectRef: 00013708a42f3ddd
ERROR Browser (Service 14 ) 07.08.07 09:15:35
[OM 0]
Last Msg Id: 20070708131108.892.qmail(a)kazaapro.info
Last Msg DirectRef: 00013708a42f3ddd
ERROR Browser (Service 14 ) 07.09.07 09:51:34
[OM 0]
Last Msg Id: 20070709133139.15886.qmail(a)kazaapro.info
Last Msg DirectRef: 000134d16d602ed9
ERROR Administration(Install Servic) 07.26.07 07:34:24
[SYS 22] Invalid argument
Current errno value: 22
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
ERROR Administration(Install Servic) 07.26.07 07:34:24
[SYS 22] Invalid argument
Current errno value: 22
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
<- /build/scalix-MAIN/src/lib/ombase/sdl/sdl_Parse.c:1391[117,110]
-> ccs_DoInitTables
-> ccs_AttemptSMem
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
ERROR Administration(Install Servic) 07.26.07 07:34:24
[SYS 22] Invalid argument
Current errno value: 22
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
<- /build/scalix-MAIN/src/lib/ombase/sdl/sdl_Parse.c:1391[117,110]
-> ccs_DoInitTables
-> ccs_AttemptSMem
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
<- /build/scalix-MAIN/src/lib/ombase/ccs/ccs_Smem.c:284[117,210]
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/lib/ombase/os/os_shrmem.c:37[1,22]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 13:02:03
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 13:57:06
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 14:01:01
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR CDA Server (CDA Server ) 08.24.07 14:08:44
[OM 28664] There is already a CDA server process running
-> ccs_AttemptSMem
<- ccs_AttemptSMem
<- ccs_DoInitTables
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
-> cvc_IsMappingAvail2
-> uni_GetCharset
-> cvc_IsMappingAvail3
<- cvc_IsMappingAvail3
<- uni_GetCharset
<- cvc_IsMappingAvail2
<- /build/scalix-MAIN/src/bin/cda/cda_daemon.c:799[205,28664]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 15:03:52
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 15:08:16
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 16:03:45
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 16:08:16
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 16:08:16
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 16:35:14
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:01:01
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:08:17
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 17:11:41
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:01:06
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:05:15
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:16
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:16
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:17
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:17
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 18:20:13
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:01:05
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:17
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 19:24:31
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:01:06
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:17
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:18
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:19
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errno value: 1
<- ux_InWriteMailReply
-> ux_InConvUnixMsgToGenesis
-> ux_IsNullName
-> mim_parse_address
<- mim_parse_address
<- ux_IsNullName
-> tf_CreateFile
-> tf_FindFreeEntry
<- tf_FindFreeEntry
-> im_GetNewItemNum
<- im_GetNewItemNum
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:262[3,2409]
<- /build/scalix-MAIN/src/lib/ombase/im/im_funcs.c:282[3,2409]
<- /build/scalix-MAIN/src/lib/tf/tf_CrtFile.c:110[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:4608[3,2409]
<- /build/scalix-MAIN/src/bin/ux/ux_in.c:2009[3,2409]
SERIOUS ERROR Internet Mail (Incoming ) 08.24.07 20:08:20
[OM 2409] Failed to create new file: unable to change ownership.
Current errn
Scalix 11.0.4 on FC 5 Web Problems
Moderator: ScalixSupport
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
Looks like not all the information made it into my first post. It appears that tomcat is running, here is the output from ps aux | grep java:
root 12013 0.4 18.5 471116 95612 pts/0 Sl 06:29 1:18 /usr/java/jre1.5.0_06/bin/java -server -Djava.net.preferIPv4Stack=true -Xms256m -Xmx256m -Dscalix.instance=/var/opt/scalix/zr -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=/var/opt/scalix/zr/tomcat/conf/logging.properties -Djava.endorsed.dirs=/opt/scalix-tomcat/common/endorsed -classpath /usr/java/jre1.5.0_06/lib/tools.jar:/opt/scalix-tomcat/bin/bootstrap.jar:/opt/scalix-tomcat/bin/commons-logging-api.jar -Dcatalina.base=/var/opt/scalix/zr/tomcat -Dcatalina.home=/opt/scalix-tomcat -Djava.io.tmpdir=/var/opt/scalix/zr/tomcat/temp org.apache.catalina.startup.Bootstrap start
Here is the server.xml file:
<!-- Example Server Configuration File -->
<!-- (Modified by Scalix for use in Scalix Tomcat package.) -->
<!--
NOTE: this file is only a template for Tomcat instances.
-->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<!--
<Connector port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8" />
<Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="127.0.0.1"/>
-->
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS"
URIEncoding="UTF-8" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
address="127.0.0.1"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3"
URIEncoding="UTF-8" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="127.0.0.1">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
clusterName = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
This valve use NIO direct Byte Buffer to asynchornously store the
log.
-->
<!--
<Valve className="org.apache.catalina.valves.ByteBufferAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
I also seem to have server.xml.in located in /etc/opt/scalix-tomcat/conf:
<!-- Example Server Configuration File -->
<!-- (Modified by Scalix for use in Scalix Tomcat package.) -->
<!--
NOTE: this file is only a template for Tomcat instances.
-->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="@SHUTDOWN_PORT@" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<!--
<Connector port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8" />
-->
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS"
URIEncoding="UTF-8" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
address="@HOST@"
maxThreads="500" minSpareThreads="50" maxSpareThreads="125"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3"
URIEncoding="UTF-8" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="@HOST@">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="@HOST@" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
clusterName = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
This valve use NIO direct Byte Buffer to asynchornously store the
log.
-->
<!--
<Valve className="org.apache.catalina.valves.ByteBufferAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
Email is working, I am able to send and receive mail, both locally and from the defined smart host. Any help would be really appreciated.
root 12013 0.4 18.5 471116 95612 pts/0 Sl 06:29 1:18 /usr/java/jre1.5.0_06/bin/java -server -Djava.net.preferIPv4Stack=true -Xms256m -Xmx256m -Dscalix.instance=/var/opt/scalix/zr -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=/var/opt/scalix/zr/tomcat/conf/logging.properties -Djava.endorsed.dirs=/opt/scalix-tomcat/common/endorsed -classpath /usr/java/jre1.5.0_06/lib/tools.jar:/opt/scalix-tomcat/bin/bootstrap.jar:/opt/scalix-tomcat/bin/commons-logging-api.jar -Dcatalina.base=/var/opt/scalix/zr/tomcat -Dcatalina.home=/opt/scalix-tomcat -Djava.io.tmpdir=/var/opt/scalix/zr/tomcat/temp org.apache.catalina.startup.Bootstrap start
Here is the server.xml file:
<!-- Example Server Configuration File -->
<!-- (Modified by Scalix for use in Scalix Tomcat package.) -->
<!--
NOTE: this file is only a template for Tomcat instances.
-->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<!--
<Connector port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8" />
<Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="127.0.0.1"/>
-->
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS"
URIEncoding="UTF-8" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
address="127.0.0.1"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3"
URIEncoding="UTF-8" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="127.0.0.1">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
clusterName = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
This valve use NIO direct Byte Buffer to asynchornously store the
log.
-->
<!--
<Valve className="org.apache.catalina.valves.ByteBufferAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
I also seem to have server.xml.in located in /etc/opt/scalix-tomcat/conf:
<!-- Example Server Configuration File -->
<!-- (Modified by Scalix for use in Scalix Tomcat package.) -->
<!--
NOTE: this file is only a template for Tomcat instances.
-->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="@SHUTDOWN_PORT@" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<!--
<Connector port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8" />
-->
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS"
URIEncoding="UTF-8" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
address="@HOST@"
maxThreads="500" minSpareThreads="50" maxSpareThreads="125"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3"
URIEncoding="UTF-8" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="@HOST@">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="@HOST@" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
clusterName = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
This valve use NIO direct Byte Buffer to asynchornously store the
log.
-->
<!--
<Valve className="org.apache.catalina.valves.ByteBufferAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
Email is working, I am able to send and receive mail, both locally and from the defined smart host. Any help would be really appreciated.
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
The Saga Continues
Ok, one mistake I found was that I downloaded 11.0.2 and there was a 11.1 available. I downloaded 11.1, ran the installer this morning. First thing was my smart host entry in sendmail.cf was changed, I reran mc4 and regenerated a cf file, fixed that problem. SAC, Webmail....still getting errors. I ran omcheck -s -d > /tmp/check_file and found that I had a bunch of files owned by user 60536 (not scalix). Ran the generated script and fixed those. Tomcat is running on the system, ps uax | grep java produces:
Tomcat appears to be running as root...should it be running as apache, scalix or possibly a user named tomcat??
lsof -i :8009 produces:
I guess that is telling me that port 8009 TCP is listening, but only to localhost.localdomain
I really try not to physically touch the machine, so should the localhost.localdomain be pointing to the VPN address of the machine??
I can send and receive email internally and eternally just fine, the problem really is that I can not access SAC or Webmail (SWA). Has anyone made it through to the other side of this particular cob web??
Code: Select all
root 2370 0.5 18.0 485176 93036 ? Sl 08:48 1:13 /usr/java/jre1.5.0_11/bin/java -server -Djava.net.preferIPv4Stack=true -Xms256m -Xmx256m -Dscalix.instance=/var/opt/scalix/zr -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=/var/opt/scalix/zr/tomcat/conf/logging.properties -Djava.endorsed.dirs=/opt/scalix-tomcat/common/endorsed -classpath /usr/java/jre1.5.0_11/lib/tools.jar:/opt/scalix-tomcat/bin/bootstrap.jar:/opt/scalix-tomcat/bin/commons-logging-api.jar -Dcatalina.base=/var/opt/scalix/zr/tomcat -Dcatalina.home=/opt/scalix-tomcat -Djava.io.tmpdir=/var/opt/scalix/zr/tomcat/temp org.apache.catalina.startup.Bootstrap startTomcat appears to be running as root...should it be running as apache, scalix or possibly a user named tomcat??
lsof -i :8009 produces:
Code: Select all
java 2370 root 32u IPv4 7529 TCP localhost.localdomain:8009->localhost.localdomain:46648 (ESTABLISHED)
java 2370 root 34u IPv4 7534 TCP localhost.localdomain:8009->localhost.localdomain:46650 (ESTABLISHED)
java 2370 root 40u IPv4 7368 TCP localhost.localdomain:8009 (LISTEN)
java 2370 root 41u IPv4 7386 TCP localhost.localdomain:8009->localhost.localdomain:46646 (ESTABLISHED)
java 2370 root 42u IPv4 7539 TCP localhost.localdomain:8009->localhost.localdomain:46652 (ESTABLISHED)
java 2370 root 43u IPv4 7544 TCP localhost.localdomain:8009->localhost.localdomain:46654 (ESTABLISHED)
java 2370 root 44u IPv4 7549 TCP localhost.localdomain:8009->localhost.localdomain:46656 (ESTABLISHED)
java 2370 root 45u IPv4 7554 TCP localhost.localdomain:8009->localhost.localdomain:46658 (ESTABLISHED)
java 2370 root 46u IPv4 7559 TCP localhost.localdomain:8009->localhost.localdomain:46660 (ESTABLISHED)
java 2370 root 47u IPv4 7564 TCP localhost.localdomain:8009->localhost.localdomain:46676 (ESTABLISHED)
java 2370 root 48u IPv4 8028 TCP localhost.localdomain:8009->localhost.localdomain:46678 (ESTABLISHED)
java 2370 root 49u IPv4 8479 TCP localhost.localdomain:8009->localhost.localdomain:54874 (ESTABLISHED)
java 2370 root 50u IPv4 11684 TCP localhost.localdomain:8009->localhost.localdomain:44783 (ESTABLISHED)
java 2370 root 51u IPv4 12943 TCP localhost.localdomain:8009->localhost.localdomain:44785 (ESTABLISHED)
java 2370 root 52u IPv4 12954 TCP localhost.localdomain:8009->localhost.localdomain:44786 (ESTABLISHED)
httpd 2620 apache 12u IPv4 11683 TCP localhost.localdomain:54874->localhost.localdomain:8009 (ESTABLISHED)
httpd 2620 apache 13u IPv4 12953 TCP localhost.localdomain:44785->localhost.localdomain:8009 (ESTABLISHED)I guess that is telling me that port 8009 TCP is listening, but only to localhost.localdomain
I really try not to physically touch the machine, so should the localhost.localdomain be pointing to the VPN address of the machine??
I can send and receive email internally and eternally just fine, the problem really is that I can not access SAC or Webmail (SWA). Has anyone made it through to the other side of this particular cob web??
-
Valerion
- Scalix Star
- Posts: 2730
- Joined: Thu Feb 26, 2004 7:40 am
- Location: Johannesburg, South Africa
- Contact:
tomcat does indeed run as root by default. You can set it to be an unprivileged user, but then you have to put the correct entries into your sudoers file, as some things it needs to do can only be done as root. Instructions are on the Scalix wiki.
the 8009 on localhost is correct. Apache's mod_jk or mod_proxy will forward connections to that port. If you want to test if the issue is in tomcat itself (as opposed to apache), you can uncomment the 8080 connector in /var/opt/scalix/??/tomcat/conf/server.xml and connect to that directly. Webmail should at least work then.
the 8009 on localhost is correct. Apache's mod_jk or mod_proxy will forward connections to that port. If you want to test if the issue is in tomcat itself (as opposed to apache), you can uncomment the 8080 connector in /var/opt/scalix/??/tomcat/conf/server.xml and connect to that directly. Webmail should at least work then.
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
Thanks Valerion,
I did fire up the X interface on the system and locally on the host system I get all the way to the login screen. I attempted to log in with the sxadmin user's credentials and ... no luck. I used to be able to access SAC and Webmail from anywhere. My first thought this morning was to turn down tomcat and apache, rerun the installer and see if it updates and "fixes" my problem. I'm having second thoughts about doing that as I don't want to end up with more of a mess than I have now. Any pointers???
I did fire up the X interface on the system and locally on the host system I get all the way to the login screen. I attempted to log in with the sxadmin user's credentials and ... no luck. I used to be able to access SAC and Webmail from anywhere. My first thought this morning was to turn down tomcat and apache, rerun the installer and see if it updates and "fixes" my problem. I'm having second thoughts about doing that as I don't want to end up with more of a mess than I have now. Any pointers???
-
Valerion
- Scalix Star
- Posts: 2730
- Joined: Thu Feb 26, 2004 7:40 am
- Location: Johannesburg, South Africa
- Contact:
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
Another thought
The scalix server is inside a VPN using IP address 192.168.2.54 with DynDNS having the zone files MX is pointed to zephyr.genfam.info. The A record for the domain obtains the IP from my router. It isn't a static IP. Previously to upgrading to 11.1 from 11.0.02 sac and webmail worked fine and the scalix seemed happy. Could it be that the NAT redirection is tossing sac and webmail a curve? I've litterly read almost every post on the forums that mention sac and the 503 error persists. My last attempt I uninstalled all the web services and uninstalled tomcat and then reinstalled them. No luck... The sxadmin and sxqueryadmin users passwords are fine. I have another web site set up as a VirtualHost, mapped in /etc/opt/scalix-tomcat/connector/ajp/instance-zephyr.conf which works so it seems the mod_proxy_ajp is working. Not too sure where else to look...
-
Valerion
- Scalix Star
- Posts: 2730
- Joined: Thu Feb 26, 2004 7:40 am
- Location: Johannesburg, South Africa
- Contact:
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
Hi Valerion,
The previous version of Scalix I was running was a 11. version using VirtualHosts with Apache. It worked fine. The only odd thing I experienced then was that once I installed scalix 11.01 all of my VirtualHost configurations had to be inside /etc/opt/scalix-tomcat/connector/ajp/instance-zephyr.conf. I didn't necessarily see that as a problem then. I do have another public web site that is hosted on the system that currently is setup as a VirtualHost, it is running with the entries in /etc/opt/scalix-tomcat/connector/ajp/instance-zephyr.com just fine. That would indicate that the mod_proxy_ajp is functioning as intended. As far as I can tell the real problem seems to be with java and tomcat. I did notice that the JRE1.5.0_11 that is required by Scalix 11.1 is missing tools.jar (which is called from the java command to start tomcat). Researching that I found that tools.jar does not ship with JRE, it is a JDK file. My previous Scalix instance 11.02 was using JDK 1.42 and worked as it should. I have the debug entries in both log4j.properties files, unfortunately, without being able to actually access sac or webmail the entries I'm getting are only related to initialization. As I've poured through the files looking for things that could be wrong I noticed there were references to sample-service-config.xml which the contents are shown below:
This being an example file I assumed it actually should not be getting parsed, but it is. This file is in /var/opt/scalix/zr/caa/config and is the only config (xml) file producing anything that looks like an error during initialization.
The odd thing is that email and the address book are working using Outlook as a client, I just can't access the web admin interface or webmail. I did check the sxadmin and sxqueryadmin users using ldapsearch and both appear fine, I get all the information concerning the accounts. I've run omcheck -s -d > /tmp/scalix_fix_perms.sh the resulting script is not showing that there are any owner, group or permission problems. (all the components listed have ....checks complete with nothing else listed).
Here is the output from ps aux | grep java:
Here are the .jar files located in /opt/scalix-tomcat/bin:
Here are the .jar files located in /usr/java/jre1.5.0_11/lib/:
As you can see from the above, there is no tools.jar file. What has me puzzled is why I am not seeing an error...
I went and retrieved jdk1.5.0_12 and re-ran the scalix-installer thinking I could point the installer at the jdk instead of the jre, no luck, the installer is definitely wanting jre. I checked jre1.5.0_11 and 12, there is no tools.jar shipped with them. This is what has me thinking the problem is with tomcat or java or both.
I a bit afraid to completely uninstall scalix, I know I should be able to tar the message store and restore the email contained, but if I can not make scalix happy again on this box the message store itself wouldn't be too useful to me.
If I ever get this working again I'll definitely think twice before I upgrade... Any light you can shed on what else I can look at is a BIG help!!!!
The previous version of Scalix I was running was a 11. version using VirtualHosts with Apache. It worked fine. The only odd thing I experienced then was that once I installed scalix 11.01 all of my VirtualHost configurations had to be inside /etc/opt/scalix-tomcat/connector/ajp/instance-zephyr.conf. I didn't necessarily see that as a problem then. I do have another public web site that is hosted on the system that currently is setup as a VirtualHost, it is running with the entries in /etc/opt/scalix-tomcat/connector/ajp/instance-zephyr.com just fine. That would indicate that the mod_proxy_ajp is functioning as intended. As far as I can tell the real problem seems to be with java and tomcat. I did notice that the JRE1.5.0_11 that is required by Scalix 11.1 is missing tools.jar (which is called from the java command to start tomcat). Researching that I found that tools.jar does not ship with JRE, it is a JDK file. My previous Scalix instance 11.02 was using JDK 1.42 and worked as it should. I have the debug entries in both log4j.properties files, unfortunately, without being able to actually access sac or webmail the entries I'm getting are only related to initialization. As I've poured through the files looking for things that could be wrong I noticed there were references to sample-service-config.xml which the contents are shown below:
Code: Select all
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
This is the configuration file for a CAA Service Module and is parsed by CAAConfigLoader
which attempts to load all the values into the system.
Copy this file and name it something using the convention <service-name>-config.xml,
make sure it goes in the webapps/caa/config directory, remove this comment and add your own
service config (see below).
Each service is in a tag of its own (e.g. <my-service> below). There can be multiple services in this
file if you wish.
The following elements can be used:
<disabled> - set this to true to make this service unavailable to clients
There are several "components" that can be configured:
<transformer> - specifies the CAATransformer implementation class (mandatory)
<connection> - specifies the CAAConnection implementation class (optional)
<service> - specifies the CAAService implementation class (mandatory)
<session> - specifies the CAASession implementation class (optional)
<securityProvider> - specifies the CAASecurityProvider implementation class (optional)
All the mandatory component class files specified *must* exist in the classpath when the system is
started.
Each component can have further arbitrary configuration at the <class> level or by specifying
delegate configuration to another class using a <configurator> element. This element can contain:
<class> - specifies the CAAConfigurable implementation class (mandatory) that
will be delegated to handle configuration for this component. The framework
will call readConfig()on this class.
<params> - an element containing arbitrary parameters to pass to the class specified
in <class>. This can be any valid XML and as long as the delegate can
handle it OK, you should be OK.
Further help on how to implement the interfaces mentioned above can be found in the main
CAA Developer's Guide.
Enjoy!
-->
<caa-config>
<!-- below is a sample service configuration. Create your own like this
<my-service>
<disabled>
false
</disabled>
<transformer>
<class>
com.scalix.mytest.TestTransformer
</class>
</transformer>
<connection>
<class>
com.scalix.mytest.TestConnection
</class>
<configurator>
<class>
com.scalix.caa.framework.CAAConnectionPoolManager
</class>
<params>
<minConnections>1</minConnections>
<maxConnections>8</maxConnections>
</params>
</configurator>
</connection>
<service>
<class>
com.scalix.mytest.TestService
</class>
</service>
<securityProvider>
<class>
com.scalix.mytest.TestKerberosProvider
</class>
</securityProvider>
</my-service>
-->
</caa-config>This being an example file I assumed it actually should not be getting parsed, but it is. This file is in /var/opt/scalix/zr/caa/config and is the only config (xml) file producing anything that looks like an error during initialization.
The odd thing is that email and the address book are working using Outlook as a client, I just can't access the web admin interface or webmail. I did check the sxadmin and sxqueryadmin users using ldapsearch and both appear fine, I get all the information concerning the accounts. I've run omcheck -s -d > /tmp/scalix_fix_perms.sh the resulting script is not showing that there are any owner, group or permission problems. (all the components listed have ....checks complete with nothing else listed).
Here is the output from ps aux | grep java:
Code: Select all
root 1544 0.8 16.1 380736 83548 pts/0 Sl 06:31 1:39 /usr/java/jre1.5.0_11/bin/java -server -Djava.net.preferIPv4Stack=true -Xms128m -Xmx128m -Dscalix.instance=/var/opt/scalix/zr -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=/var/opt/scalix/zr/tomcat/conf/logging.properties -Djava.endorsed.dirs=/opt/scalix-tomcat/common/endorsed -classpath /usr/java/jre1.5.0_11/lib/tools.jar:/opt/scalix-tomcat/bin/bootstrap.jar:/opt/scalix-tomcat/bin/commons-logging-api.jar -Dcatalina.base=/var/opt/scalix/zr/tomcat -Dcatalina.home=/opt/scalix-tomcat -Djava.io.tmpdir=/var/opt/scalix/zr/tomcat/temp org.apache.catalina.startup.Bootstrap startHere are the .jar files located in /opt/scalix-tomcat/bin:
Code: Select all
-rw-r--r-- 1 root root 23669 Mar 5 2007 /opt/scalix-tomcat/bin/bootstrap.jar
-rw-r--r-- 1 root root 9341 Mar 5 2007 /opt/scalix-tomcat/bin/commons-daemon.jar
-rw-r--r-- 1 root root 26202 Mar 5 2007 /opt/scalix-tomcat/bin/commons-logging-api.jar
-rw-r--r-- 1 root root 12972 Mar 5 2007 /opt/scalix-tomcat/bin/tomcat-juli.jarHere are the .jar files located in /usr/java/jre1.5.0_11/lib/:
Code: Select all
-rw-r--r-- 1 root root 8723578 Aug 30 07:37 ./charsets.jar
-rw-r--r-- 1 root root 1999146 Aug 30 07:37 ./deploy.jar
-rw-r--r-- 1 root root 142477 Sep 1 20:45 ./dt.jar
-rw-r--r-- 1 root root 278020 Sep 1 20:45 ./htmlconverter.jar
-rw-r--r-- 1 root root 774619 Aug 30 07:37 ./javaws.jar
-r--r--r-- 1 root root 82642 Dec 15 2006 ./jce.jar
-rw-r--r-- 1 root root 232634 Sep 1 20:45 ./jconsole.jar
-rw-r--r-- 1 root root 487141 Aug 30 07:37 ./jsse.jar
-rw-r--r-- 1 root root 924848 Aug 30 07:37 ./plugin.jar
-rw-r--r-- 1 root root 35757921 Aug 30 07:37 ./rt.jar
-rw-r--r-- 1 root root 1527255 Sep 1 20:45 ./sa-jdi.jarAs you can see from the above, there is no tools.jar file. What has me puzzled is why I am not seeing an error...
I went and retrieved jdk1.5.0_12 and re-ran the scalix-installer thinking I could point the installer at the jdk instead of the jre, no luck, the installer is definitely wanting jre. I checked jre1.5.0_11 and 12, there is no tools.jar shipped with them. This is what has me thinking the problem is with tomcat or java or both.
I a bit afraid to completely uninstall scalix, I know I should be able to tar the message store and restore the email contained, but if I can not make scalix happy again on this box the message store itself wouldn't be too useful to me.
If I ever get this working again I'll definitely think twice before I upgrade... Any light you can shed on what else I can look at is a BIG help!!!!
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
I was going back through the apache error log and noticed today that I have entries as shown here:
It appears this might the cause of the error 503....
I'll investigate more, if any of the Scalix Techs can guide me to the right place to look I'd be grateful!!!
Code: Select all
[Mon Sep 03 12:59:36 2007] [error] ap_proxy_connect_backend disabling worker for (localhost)
[Mon Sep 03 12:59:36 2007] [error] proxy: AJP: failed to make connection to backend: localhost
[Mon Sep 03 12:59:46 2007] [error] proxy: AJP: disabled connection for (localhost)
[Mon Sep 03 12:59:56 2007] [error] proxy: AJP: disabled connection for (localhost)
[Mon Sep 03 13:00:06 2007] [error] proxy: AJP: disabled connection for (localhost)
[Mon Sep 03 13:00:16 2007] [error] proxy: AJP: disabled connection for (localhost)
[Mon Sep 03 13:00:26 2007] [error] proxy: AJP: disabled connection for (localhost)
[Mon Sep 03 13:00:36 2007] [error] (111)Connection refused: proxy: AJP: attempt to connect to 127.0.0.1:8009 (localhost) failedIt appears this might the cause of the error 503....
I'll investigate more, if any of the Scalix Techs can guide me to the right place to look I'd be grateful!!!
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
Reading through some more posts associated with the error:
I think I've found the culprit, and now can access sac via:
Attempting to log in with sxadmin with the correct password (I've run ldapsearch against the login and sxqueryadmin) I am now getting:
The post:
http://www.scalix.com/forums/viewtopic.php?t=6920&postdays=0&postorder=asc&start=0
sort of steered me in the right direction.
Now the infamous Could not login error.... arrrggghhh
Any help is greatly appreciated!![/url]
Code: Select all
Connection refused: proxy: AJP: attempt to connectI think I've found the culprit, and now can access sac via:
Code: Select all
https://192.168.2.1/sacAttempting to log in with sxadmin with the correct password (I've run ldapsearch against the login and sxqueryadmin) I am now getting:
Code: Select all
Could not login
Check the login ID and Password.The post:
http://www.scalix.com/forums/viewtopic.php?t=6920&postdays=0&postorder=asc&start=0
sort of steered me in the right direction.
Now the infamous Could not login error.... arrrggghhh
Any help is greatly appreciated!![/url]
-
Valerion
- Scalix Star
- Posts: 2730
- Joined: Thu Feb 26, 2004 7:40 am
- Location: Johannesburg, South Africa
- Contact:
-
Mark.Kosinski
- Posts: 10
- Joined: Wed Aug 29, 2007 10:54 am
-
deyjvu
- Posts: 175
- Joined: Tue Oct 25, 2005 6:48 am
- Location: Australia
I have an interesting variation on this theme.
I can get logged on as the user sxadmin in SAC and SWA but the mobile client gives me an error "An error occurred: Unknown error (A00000). catalina.out shows:
org.hibernate.exception.GenericJDBCException: Cannot open connection
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:29)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:420)
at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:40)
at $Proxy0.createStatement(Unknown Source)
at com.scalix.api.db.DbUtils.getSession(DbUtils.java:62)
at com.scalix.api.mailbox.Mailbox.checkForTables(Mailbox.java:1523)
at com.scalix.api.mailbox.Mailbox.init(Mailbox.java:166)
at com.scalix.api.service.Context.getServiceByName(Context.java:194)
at com.scalix.api.service.Context.getMailboxService(Context.java:166)
at com.scalix.api.rest.MailboxServlet.doGet(MailboxServlet.java:63)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.springframework.web.servlet.mvc.ServletWrappingController.handleRequestInternal(ServletWrappingController.java:174)
at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:839)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:774)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:460)
at com.scalix.api.PlatformDispatcherServlet.service(PlatformDispatcherServlet.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.springframework.web.filter.AbstractRequestLoggingFilter.doFilterInternal(AbstractRequestLoggingFilter.java:133)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:773)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:895)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLException: Connections could not be acquired from the underlying database!
at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:104)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:236)
at com.mchange.v2.c3p0.PoolBackedDataSource.getConnection(PoolBackedDataSource.java:94)
at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:35)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:417)
... 38 more
Caused by: com.mchange.v2.resourcepool.CannotAcquireResourceException: A ResourcePool could not acquire a resource from its primary factory or source.
at com.mchange.v2.resourcepool.BasicResourcePool.awaitAcquire(BasicResourcePool.java:970)
at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:208)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:232)
... 41 more
The process url is showing main.do - then I thought there was an entry in the general.cfg that could be affecting this LDAP_MUST_AUTHENTICATE="false" so I took this out and restarted everything.
Now the error is as above, user name/password invalid but they are not - this is only on the mobile client. I can still logon to SAC and the webmail as sxadmin but not the mobile client using the same name and password for all of them.
scalix-api.log is showing:
007-11-15 16:18:10,702 WARN [PlatformDispatcherServlet.service:76] processRequest threw exception
org.springframework.web.util.NestedServletException: Request processing failed; nested exception is java.lang.NullPointerException
Caused by:
java.lang.NullPointerException
at com.scalix.api.directory.Directory.getAttributesBySmtpAddress(Directory.java:85)
at com.scalix.api.auth.ImapAuthenticationService.authenticate(ImapAuthenticationService.java:174)
at com.scalix.api.auth.Frontdoor.authenticate(Frontdoor.java:18)
at com.scalix.api.rest.CheckAuthInterceptor.authenticateAccount(CheckAuthInterceptor.java:76)
at com.scalix.api.rest.CheckAuthInterceptor.preHandle(CheckAuthInterceptor.java:50)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:829)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:774)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:460)
at com.scalix.api.PlatformDispatcherServlet.service(PlatformDispatcherServlet.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.springframework.web.filter.AbstractRequestLoggingFilter.doFilterInternal(AbstractRequestLoggingFilter.java:133)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:773)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:895)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Oh, I have hosting running on this server - would this impact mobile client? I can not logon to the SWA or Mobile client with any other users. Now that means users that existed on the primary mailnode or the 'hosted' mailnodes.
I'm on 11.2 running on centos 5.
I do see this warning in the catalina.out
og4j:WARN No appenders could be found for logger (org.apache.catalina.core.ContainerBase.[Catalina].[lavender.customtech.com.au].[/api].[rest]).
log4j:WARN Please initialize the log4j system properly.
How do I initialize the log4j?
I can get logged on as the user sxadmin in SAC and SWA but the mobile client gives me an error "An error occurred: Unknown error (A00000). catalina.out shows:
org.hibernate.exception.GenericJDBCException: Cannot open connection
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:29)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:420)
at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:40)
at $Proxy0.createStatement(Unknown Source)
at com.scalix.api.db.DbUtils.getSession(DbUtils.java:62)
at com.scalix.api.mailbox.Mailbox.checkForTables(Mailbox.java:1523)
at com.scalix.api.mailbox.Mailbox.init(Mailbox.java:166)
at com.scalix.api.service.Context.getServiceByName(Context.java:194)
at com.scalix.api.service.Context.getMailboxService(Context.java:166)
at com.scalix.api.rest.MailboxServlet.doGet(MailboxServlet.java:63)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.springframework.web.servlet.mvc.ServletWrappingController.handleRequestInternal(ServletWrappingController.java:174)
at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:839)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:774)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:460)
at com.scalix.api.PlatformDispatcherServlet.service(PlatformDispatcherServlet.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.springframework.web.filter.AbstractRequestLoggingFilter.doFilterInternal(AbstractRequestLoggingFilter.java:133)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:773)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:895)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLException: Connections could not be acquired from the underlying database!
at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:104)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:236)
at com.mchange.v2.c3p0.PoolBackedDataSource.getConnection(PoolBackedDataSource.java:94)
at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:35)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:417)
... 38 more
Caused by: com.mchange.v2.resourcepool.CannotAcquireResourceException: A ResourcePool could not acquire a resource from its primary factory or source.
at com.mchange.v2.resourcepool.BasicResourcePool.awaitAcquire(BasicResourcePool.java:970)
at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:208)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:232)
... 41 more
The process url is showing main.do - then I thought there was an entry in the general.cfg that could be affecting this LDAP_MUST_AUTHENTICATE="false" so I took this out and restarted everything.
Now the error is as above, user name/password invalid but they are not - this is only on the mobile client. I can still logon to SAC and the webmail as sxadmin but not the mobile client using the same name and password for all of them.
scalix-api.log is showing:
007-11-15 16:18:10,702 WARN [PlatformDispatcherServlet.service:76] processRequest threw exception
org.springframework.web.util.NestedServletException: Request processing failed; nested exception is java.lang.NullPointerException
Caused by:
java.lang.NullPointerException
at com.scalix.api.directory.Directory.getAttributesBySmtpAddress(Directory.java:85)
at com.scalix.api.auth.ImapAuthenticationService.authenticate(ImapAuthenticationService.java:174)
at com.scalix.api.auth.Frontdoor.authenticate(Frontdoor.java:18)
at com.scalix.api.rest.CheckAuthInterceptor.authenticateAccount(CheckAuthInterceptor.java:76)
at com.scalix.api.rest.CheckAuthInterceptor.preHandle(CheckAuthInterceptor.java:50)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:829)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:774)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:460)
at com.scalix.api.PlatformDispatcherServlet.service(PlatformDispatcherServlet.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.springframework.web.filter.AbstractRequestLoggingFilter.doFilterInternal(AbstractRequestLoggingFilter.java:133)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:773)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:895)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Oh, I have hosting running on this server - would this impact mobile client? I can not logon to the SWA or Mobile client with any other users. Now that means users that existed on the primary mailnode or the 'hosted' mailnodes.
I'm on 11.2 running on centos 5.
I do see this warning in the catalina.out
og4j:WARN No appenders could be found for logger (org.apache.catalina.core.ContainerBase.[Catalina].[lavender.customtech.com.au].[/api].[rest]).
log4j:WARN Please initialize the log4j system properly.
How do I initialize the log4j?
Return to “Scalix Management Services”
Who is online
Users browsing this forum: No registered users and 5 guests