If anyone happened to check the Scalix Server forum, I had a server crash due to a drive failure. I gave up on that server for the time being. I figure the drives are dead, and I've loaded another machine with Fedora Core 4 (I'm also running a graphical interface), got my website running off of it, and also I'm about to start the load the Scalix Server, but I've got a small issue.
When I go through the initial System Check before install (I've never done this install before... So I assume it's before the install
) I fail on the network check and on the Dependency check. I get this:
--------------------------------------------------
Environment Check passed.
Filesystem Check passed.
Network check failed -- Msg: Could not determine network interface configuration for line
Dependency check warning -- The following packages will be installed next to resolve conflicts:
libical
Dependency check failed -- Please resolve the following package conflicts and re-run the system checks:
compat-libstdc++-296 is needed by scalix-server-10.0.1.3.fc4.i386
libstdc++-libc6.2-2.so.3 is needed by scalix-server-10.0.1.3-1.fc4.i386
Running services check passed
--------------------------------------------------
I don't know anything about the Network check failed.... Hopefully someone can enlighten me to the way
Also: On the Dependency check... will it install the libical, and the other two packages that are needed or will I need to run those manually?
I also looked in network configuration GUI. Fedora is recognizing my adapter as a Linksys NC100 Network Everywhere Fast Ethernet 10/100 card (It's actually a LNE100TX v4.1 card... I don't know if Fedora's recognition is the right one but it's what Linux recognized it as, and it's running a tulip driver. For some reason Fedora wouldn't recognize the onboard Intel Pro 100 VE interface... and the drivers I downloaded off of the intel website for Redhat didn't seem to work... not that I really expected them to but it was worth a shot) All of the settings when I edit the device from the hardware tab are not set, and the IRQ is set to Unknown. Seems like this might have something to do with my problem, but if it does what do I do to resolve it?
Thanks in advance!
